Re: New Member of this forum from Denmark :)
Posted: Tue Mar 21, 2017 2:54 pm
Thanks Bruce 
Yeah that could be nice
Yeah that could be nice The Talking Machine Forum — For All Antique Phonographs & Recordings
https://forum.talkingmachine.info/
New Member of this forum from Denmark :)
https://forum.talkingmachine.info/viewtopic.php?f=11&t=29555
Page 2 of 3
Re: New Member of this forum from Denmark :)
Posted: Tue Mar 21, 2017 3:36 pm
Really nice job restoring that little phonograph, congratulations & welcome to the Forum! You have some very nice machines.
Re: New Member of this forum from Denmark :)
Posted: Tue Mar 21, 2017 10:26 pm
Nice machines , it is great to welcome a collector who can add his knowledge to this forum. Tom B
Re: New Member of this forum from Denmark :)
Posted: Wed Mar 22, 2017 5:14 am
Is it possible to fix this spring? and how?
Re: New Member of this forum from Denmark :)
Posted: Wed Mar 22, 2017 7:32 am
Needs to be replaced, the steel fatigued. I recommend extreme care when removing it, the pieces have sharp edges and may eject with high energy. The best would be to push the spring parts with a screwdriver having the barrel inside a thick cloth sack.Billehifi wrote:Is it possible to fix this spring? and how?
Re: New Member of this forum from Denmark :)
Posted: Wed Mar 22, 2017 8:29 am
Ditto, absolutely impossible to repair, even in case it would immediately break in another point. Needs to be replaced.
Some say that this happens when a phono/gramo is left wounded up and then stored in a place with temperatures below zero.
Some say that this happens when a phono/gramo is left wounded up and then stored in a place with temperatures below zero.
Re: New Member of this forum from Denmark :)
Posted: Thu Mar 23, 2017 5:00 pm
Welcome Johan!
We now us from Facebook and Instagram I think?
I'am also new here in this Forum.
Greetings from Germany,Dario
We now us from Facebook and Instagram I think?
I'am also new here in this Forum.Greetings from Germany,Dario
Re: New Member of this forum from Denmark :)
Posted: Fri Mar 24, 2017 7:24 am
Hello Dario
Welcome to this forum Glad to see you in here
Welcome to this forum
Glad to see you in here Re: New Member of this forum from Denmark :)
Posted: Fri Mar 24, 2017 1:29 pm
Welcome to the forum
You need to measure the length and width of the spring and take note of the type of ends you need to replace the spring. Make SURE you mark the direction of the spring with a marker on tape so the new spring is installed the same direction.
Kevan
You need to measure the length and width of the spring and take note of the type of ends you need to replace the spring. Make SURE you mark the direction of the spring with a marker on tape so the new spring is installed the same direction.
Kevan
Re: New Member of this forum from Denmark :)
Posted: Mon Oct 30, 2017 10:55 am
Hello again
I've bought this HMV gramophone and got it very cheap. It was standing inside a red cross shop in Copenhagen and I got it for about 45 dollars(VERY Cheap)
The spring is broken and the soundbox is missing. The tonearm needs a small screw(but I think, I have one in spare parts)
What do you guys think of my buy?
I've bought this HMV gramophone and got it very cheap. It was standing inside a red cross shop in Copenhagen and I got it for about 45 dollars(VERY Cheap)
The spring is broken and the soundbox is missing. The tonearm needs a small screw(but I think, I have one in spare parts)
What do you guys think of my buy?