All,
I posted a thread in the Machines section of the forum about a friend's a Pathé Concert A, and it turns out the horn now with that particular example is not original to the machine. Some other collectors speculated that this horn might be Indian in origin, however, the quality of the metal work seems to exclude that possibility. It then occurred to me that the horn might be from a Mammut Coin Operated gramophone. Does the horn in the picture below look like it could have been from a Mammut gramophone? It has eleven panels on the bell, and seems to have the same shape as the Mammut horn, except that the bell is all brass, instead of being painted steel. What do you think?
Thanks!
Garret
Is This A Brass Mammut Coin-Op Horn?
-
- Victor IV
- Posts: 1522
- Joined: Wed Jan 07, 2009 10:07 pm
- Location: Lille, France
- Panatropia
- Victor II
- Posts: 282
- Joined: Fri Jan 29, 2016 10:45 am
- Personal Text: Forum Fairy....
- Location: Huntington N.Y.
Re: Is This A Brass Mammut Coin-Op Horn?
I've seen that type and shape horn on Maestrophone, Mammut, Odeon and Pathé' machines. I don't know whether it was restricted to one or two manufacturers, or perhaps simply a proprietary horn available for a wide range of machines which perhaps promised more volume. I lean toward the latter.
- Attachments
-
- image.jpeg (59.98 KiB) Viewed 2325 times
-
- Victor IV
- Posts: 1835
- Joined: Sun Mar 15, 2009 6:18 am
- Location: Luxembourg
Re: Is This A Brass Mammut Coin-Op Horn?
The horn of my German coin-op has also eleven panels, but it is made of tin, not brass. and has a support rod in the curve on the back.
- Panatropia
- Victor II
- Posts: 282
- Joined: Fri Jan 29, 2016 10:45 am
- Personal Text: Forum Fairy....
- Location: Huntington N.Y.
Re: Is This A Brass Mammut Coin-Op Horn?
Like this?
- Attachments
-
- image.jpeg (21.16 KiB) Viewed 2219 times
-
- Victor VI
- Posts: 3946
- Joined: Mon Nov 16, 2009 9:42 am
- Location: Western Canada
Re: Is This A Brass Mammut Coin-Op Horn?
I believe the horn is of German origin and has nothing to do with Maestrophone (Paillard) Swiss made machines. If a horn like this is on such a machine...it is incorrect.
That said, a friend in Europe has a massive horn like this cobbled onto his hot air machine.
That said, a friend in Europe has a massive horn like this cobbled onto his hot air machine.
-
- Victor IV
- Posts: 1835
- Joined: Sun Mar 15, 2009 6:18 am
- Location: Luxembourg
Re: Is This A Brass Mammut Coin-Op Horn?
Yes, the shape of the horn and the back support bracket look the same, although my horn was repainted.Panatropia wrote:Like this?
- Panatropia
- Victor II
- Posts: 282
- Joined: Fri Jan 29, 2016 10:45 am
- Personal Text: Forum Fairy....
- Location: Huntington N.Y.
Re: Is This A Brass Mammut Coin-Op Horn?
European pressed steel horns have always fascinated me. While there are many types, there are a few recognizable variations one encounters often. The multi-hued colors, shading and striping are a source of admiration as well.
The similarities in shape mentioned above prompts me to wonder about their manufacture. Did certain Marques produce their own in house? Were they of proprietary manufacture and bought as needed?
The similarities in shape mentioned above prompts me to wonder about their manufacture. Did certain Marques produce their own in house? Were they of proprietary manufacture and bought as needed?
-
- Victor III
- Posts: 548
- Joined: Fri Jan 16, 2009 12:54 am
- Location: The BRONX / Yankee Stadium
Re: Is This A Brass Mammut Coin-Op Horn?
This horn would be suitable on my Mammut! There were choices of styles.