Please let us know if you can make extra connectors!walser wrote: Next challenge: the connectors of the reproducers.
Jeff
Please let us know if you can make extra connectors!walser wrote: Next challenge: the connectors of the reproducers.
Of course I can! I think I will do them in aluminium and maybe in brass if I finally buy a nickel plating kit.phonodesbois wrote:BRAVO!!!
Please let us know if you can make extra connectors!walser wrote: Next challenge: the connectors of the reproducers.
Jeff
Brass would be nicer as it can be nickeled later on. For the diameter, I found 12,67/12,68 mm. Does it make sense?walser wrote: I think I will do them in aluminium and maybe in brass if I finally buy a nickel plating kit.
I will need the diameter of the tube of the reproducer. I have 3 and all of them are slightly different.
Although most of my reproducers and recorders need a 12,6/12,7mm connector, a few of them (both reproducers and recorders) would need a larger one (around 13.3mm)....walser wrote: I'm sure the last drawing showing the section is not accurate because you can see that the interior of the "connector" is totally straight and the side that connects to the phonograph must be 11 mm and the other side between 12,60 mm and 13,30 mm for the reproducers and around 12,80 mm for the recorders.