The Talking Machine Forum — For All Antique Phonographs & Recordings

It is currently Sat Sep 22, 2018 5:25 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 29 posts ]  Go to page Previous  1, 2, 3  Next
Author Message
 Post subject: Re: HMV 202
PostPosted: Fri Apr 13, 2018 3:44 am 
Offline
Victor O
User avatar
Joined: Tue Mar 27, 2018 1:28 pm
Posts: 51
Location: Espoo, Finland
Found a finnish sales brochure from 1929. For a comparison, 101 portable was 1800 finnish marks and 163 cost 6000 marks back in 1929. Could someone post other examples of period sales material/adds of 202/3 models? According to the brochure, finish on the 202 was waxed oak, so it shouldn’t be overly shiny/polished?


Attachments:
52CF7E05-C7FD-4096-9831-5EB3502F3DA5.jpeg
52CF7E05-C7FD-4096-9831-5EB3502F3DA5.jpeg [ 1.17 MiB | Viewed 663 times ]
CC601224-3A7F-4DF8-98FF-E215DC82474E.jpeg
CC601224-3A7F-4DF8-98FF-E215DC82474E.jpeg [ 1.22 MiB | Viewed 663 times ]
3BB27768-A505-487A-8E6E-9B915548D965.jpeg
3BB27768-A505-487A-8E6E-9B915548D965.jpeg [ 1.21 MiB | Viewed 663 times ]
Top
 Profile  
 
 Post subject: Re: HMV 202
PostPosted: Fri Apr 13, 2018 7:12 am 
Offline
Victor II
Joined: Tue Jun 30, 2009 8:17 am
Posts: 351
Here are two HMV catalogues that have been kindly posted on this forum in the past.

https://sounds.bl.uk/related-content/TE ... 0000A0.pdf

and an excellent Australian one.

http://www.glennamer.com/images/HMV0001.pdf


Top
 Profile  
 
 Post subject: Re: HMV 202
PostPosted: Fri Apr 13, 2018 7:31 am 
Offline
Victor O
User avatar
Joined: Tue Mar 27, 2018 1:28 pm
Posts: 51
Location: Espoo, Finland
Thanks Chunny!


Top
 Profile  
 
 Post subject: Re: HMV 202
PostPosted: Sun Apr 22, 2018 3:29 pm 
Offline
Victor III
Joined: Sun Mar 15, 2009 6:18 am
Posts: 837
Hi Jaso
Pleease find below some photos of the base. I added some measurements of the foot in one, hope it is legible.


Attachments:
HMV 202 feet 08.jpg
HMV 202 feet 08.jpg [ 65.51 KiB | Viewed 571 times ]
HMV 202 feet 04.jpg
HMV 202 feet 04.jpg [ 71.96 KiB | Viewed 571 times ]
HMV 202 feet 03.jpg
HMV 202 feet 03.jpg [ 49.56 KiB | Viewed 571 times ]
HMV 202 feet 01.jpg
HMV 202 feet 01.jpg [ 75.19 KiB | Viewed 571 times ]
Top
 Profile  
 
 Post subject: Re: HMV 202
PostPosted: Sun Apr 22, 2018 3:36 pm 
Offline
Victor O
User avatar
Joined: Tue Mar 27, 2018 1:28 pm
Posts: 51
Location: Espoo, Finland
Thank you Carlos!


Top
 Profile  
 
 Post subject: Re: HMV 202
PostPosted: Mon Apr 23, 2018 8:59 pm 
Offline
Victor II
Joined: Tue Jun 30, 2009 8:17 am
Posts: 351
Thanks Carlos for the measurements very helpful.
Only problem is my Teak 202 looks different.
Adding up your measurements the total length is 25.26cm.
Mine is exactly 24cm . Most of the cross section measurements are almost the same, the main difference is the largest middle profile. A different profile too.
Most of the 202's I have seen pictures of have your profile so I am assuming the Teak 202 was slightly different.

Here it is:
What would help is the exact lengths of the supporting cross bars between the legs.

Thanks.


Attachments:
202-leg-dim.jpg
202-leg-dim.jpg [ 118.4 KiB | Viewed 528 times ]
Top
 Profile  
 
 Post subject: Re: HMV 202
PostPosted: Tue Apr 24, 2018 9:25 pm 
Offline
Victor III
Joined: Sun Mar 15, 2009 6:18 am
Posts: 837
chunnybh wrote:
Thanks Carlos for the measurements very helpful.
Only problem is my Teak 202 looks different.
Adding up your measurements the total length is 25.26cm.
Mine is exactly 24cm . Most of the cross section measurements are almost the same, the main difference is the largest middle profile. A different profile too.
Most of the 202's I have seen pictures of have your profile so I am assuming the Teak 202 was slightly different.

Here it is:
What would help is the exact lengths of the supporting cross bars between the legs.

Thanks.


I'll do the bar measurements over the weekend, Chunny. Evidently I cannot help on the teak 202, as you seem to be the only one that owns one!


Top
 Profile  
 
 Post subject: Re: HMV 202
PostPosted: Wed Apr 25, 2018 4:06 am 
Offline
Victor II
Joined: Tue Jun 30, 2009 8:17 am
Posts: 351
I went on a hunt for someone to turn these for me. First I went to a local wood turning club. The experienced guys there all said it was easy to turn one leg but to get all four the same would be difficult. They suggested I try a wood turning factory with computerized lathes. Just got a quote from them for 4 legs and the cross supports for £275. Unfinished in oak . Not too bad I suppose but with postage that is going to go way up. I suggest anyone wanting to have these made go to their local computerized wood turners.
I might just join the club and learn to turn wood.


Top
 Profile  
 
 Post subject: Re: HMV 202
PostPosted: Wed Apr 25, 2018 10:42 am 
Offline
Victor I
Joined: Wed Jul 30, 2014 9:34 am
Posts: 165
Location: Spain
chunnybh wrote:
Just got a quote from them for 4 legs and the cross supports for £275. Unfinished in oak . Not too bad I suppose but with postage that is going to go way up. I suggest anyone wanting to have these made go to their local computerized wood turners.
I might just join the club and learn to turn wood.


For that price you can buy a wood lathe big enough for turning the legs. With some cardboard patterns and some time you will surely be able to turn 4 identical ones.

This is the method I use to turn wood to a desired shape:

https://www.youtube.com/watch?v=WQzKZrpvuZI

Regards

Pedro Martinez


Top
 Profile  
 
 Post subject: Re: HMV 202
PostPosted: Thu Apr 26, 2018 8:17 am 
Offline
Victor IV
User avatar
Joined: Sun Feb 15, 2009 5:40 pm
Posts: 1498
Location: Holy Loch in Argyll and Bute
An incredibly rare machine so well done to the OP for getting that. I'm sure there are a few empty 202 cabinets over here someone has been trying to sell for 30 years. Where are they now when someone wants them?!!

I have the exact same 202 version as Carlos but the measurements of our cabinets should be identical to the earlier version the OP has. Let me know if you still need any measurements. I note Carlos has already very kindly supplied plentiful measurements of the legs. I'd need my reading glasses these days to get so much detailed information from the leg!

I see a mint 202 has also been sold for just $3750!!!!! That's crazy cheap, even for today. Someone must be having a party right now with their 20's / 30's dance band records.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 29 posts ]  Go to page Previous  1, 2, 3  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Americanized by Maël Soucaze.