The Talking Machine Forum — For All Antique Phonographs & Recordings

It is currently Mon Oct 21, 2019 2:02 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Garrard No 11A
PostPosted: Wed Sep 11, 2019 7:09 pm 
Offline
Victor Jr
Joined: Mon Sep 09, 2019 4:35 pm
Posts: 6
Hi there,
I am refurbing a Hines Table Grand.
Have limited knowledge of this unit, and it is a first for me.
I am looking for new springs for the double spring motor. 1 of the ones inside is damaged.
Or a new motor unit.
See pics.


Attachments:
20190906_162339.jpg
20190906_162339.jpg [ 3.36 MiB | Viewed 480 times ]
20190906_162332.jpg
20190906_162332.jpg [ 3.22 MiB | Viewed 480 times ]
20190904_110641.jpg
20190904_110641.jpg [ 3.38 MiB | Viewed 480 times ]
20190904_094251.jpg
20190904_094251.jpg [ 2.88 MiB | Viewed 480 times ]
20190903_192758.jpg
20190903_192758.jpg [ 2.92 MiB | Viewed 480 times ]
Top
 Profile  
 
 Post subject: Re: Garrard No 11A
PostPosted: Thu Sep 12, 2019 2:23 am 
Offline
Victor III
User avatar
F. Depero, "Grammofono", 1923.
Joined: Thu Feb 24, 2011 4:19 am
Posts: 828
Location: Italy
Mike (user soundgen on this forum) is the man to write to for replacement springs.


Top
 Profile  
 
 Post subject: Re: Garrard No 11A
PostPosted: Thu Sep 12, 2019 5:38 am 
Offline
Victor II
User avatar
Keep'em well oiled
Joined: Mon Dec 18, 2017 2:51 am
Posts: 469
Location: Madrid, Spain
Sorry for a silly question... Are the springs really damaged, b broken, or they are simply dirty...? So much old dried grease must be cleaned first, unless the spring is really broken or badly out of shape and this can be clearly seen through the black stuff... If you clean them you can get a good surprise, these springs are incredibly durable...
Inigo


Top
 Profile  
 
 Post subject: Re: Garrard No 11A
PostPosted: Mon Sep 16, 2019 6:43 pm 
Offline
Victor Jr
Joined: Mon Sep 09, 2019 4:35 pm
Posts: 6
Hi,
Yes,
one of the springs (the one in the pliers has a tear in it about 2/3rds of the way through about 1 cm to the right of the pliers. Hard to see with a ll the grunge. Will clean up for a better look.
Thanks for the response.
Gareth


Top
 Profile  
 
 Post subject: Re: Garrard No 11A
PostPosted: Fri Sep 27, 2019 6:25 pm 
Offline
Victor I
Joined: Tue Nov 13, 2012 6:57 pm
Posts: 125
Did you get your springs ? I have plenty of old stock new mainsprings that came from a gramophone repair guy who died locally to me a few years ago . I probably have a complete working 11A motor which may be a cheaper option for you . Where are you located ? Let me know if you're interested. Regards Dulcetto


Top
 Profile  
 
 Post subject: Re: Garrard No 11A
PostPosted: Sat Sep 28, 2019 4:07 pm 
Online
Victor IV
Joined: Mon May 13, 2013 2:04 pm
Posts: 1713
Dulcetto wrote:
Did you get your springs ? I have plenty of old stock new mainsprings that came from a gramophone repair guy who died locally to me a few years ago . I probably have a complete working 11A motor which may be a cheaper option for you . Where are you located ? Let me know if you're interested. Regards Dulcetto



a complete working 11A motor which may be a cheaper option for you is the way to go !


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Bing [Bot] and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Americanized by Maël Soucaze.