CL listing: Lauzon Furniture Co phonograph- Grand Rapids, MI

Post links to auctions and classifieds here
Post Reply
K8APS
Victor Jr
Posts: 8
Joined: Thu Jan 11, 2018 8:58 am
Location: Grandville, MI

CL listing: Lauzon Furniture Co phonograph- Grand Rapids, MI

Post by K8APS »

Full disclosure... this is my listing.
I purchased this local and did a little work to it after doing a lot of research. It was a fantastic project.
Not sure if my price is in the right area for this off brand in this shape.
Here's the link...
https://grandrapids.craigslist.org/atq/ ... 53761.html
And a couple photos...
small upright.JPG
And under the hood...
small motor.JPG

User avatar
Benjamin_L
Victor III
Posts: 576
Joined: Tue Jan 13, 2015 8:00 pm
Personal Text: Honk, honk.
Location: Tennessee
Contact:

Re: CL listing: Lauzon Furniture Co phonograph- Grand Rapids

Post by Benjamin_L »

Did you make the grill yourself?

K8APS
Victor Jr
Posts: 8
Joined: Thu Jan 11, 2018 8:58 am
Location: Grandville, MI

Re: CL listing: Lauzon Furniture Co phonograph- Grand Rapids

Post by K8APS »

Benjamin_L wrote:Did you make the grill yourself?

I adapted the grille to fit. The grille was originally on a Victrola VV-7 (if I remember right). The original size was much to big to fit, so I took the time to cut down the grille to size... which was no small task in itself. There were a lot of cuts to make. The grille cloth is held in place by wood pieces pressed into slots on the back side of the grille.

I would have preferred something more original to the piece but I really haven't found any references as to what was originally installed. So instead I adapted the VV 4-7 grille to at least be fairly accurate to the vintage, or so was my train of thought.
Last edited by K8APS on Wed Nov 21, 2018 6:40 pm, edited 1 time in total.

User avatar
Phono-Phan
Victor V
Posts: 2465
Joined: Fri Apr 06, 2012 9:38 pm
Location: Plover, WI

Re: CL listing: Lauzon Furniture Co phonograph- Grand Rapids

Post by Phono-Phan »

What kind of RPM meter do you have?

K8APS
Victor Jr
Posts: 8
Joined: Thu Jan 11, 2018 8:58 am
Location: Grandville, MI

Re: CL listing: Lauzon Furniture Co phonograph- Grand Rapids

Post by K8APS »

Phono-Phan wrote:What kind of RPM meter do you have?
I didn't expect that question. It is a meter I borrowed from where I work. I'm not sure of the brand, but it's a non-contact meter that also has apparatus for contact sensing too. To read non-contact, I placed a piece of tape on the platter and held the meter over the platter so that it would detect and make a reading. The device is kept calibrated, so it should be accurate as long as the 250 lb gorilla using it didn't make a mistake. If you want specific meter model and such, I'll have to get back to you on that.

Post Reply