Edisonic and Long Playing Consoles Survey

Discussions on Talking Machines & Accessories
Post Reply
User avatar
fran604g
Victor VI
Posts: 3988
Joined: Mon Mar 04, 2013 2:22 pm
Personal Text: I'm Feeling Cranky
Location: Hemlock, NY

Edisonic and Long Playing Consoles Survey

Post by fran604g »

Hi folks,

As many of you are no doubt aware, forum member pughphonos has compiled a serial number listing of extant Edisonic Beethovens and Schuberts. After a recent conversation with him over at his post http://forum.talkingmachine.info/viewto ... =2&t=16654, we both thought it might be a good idea to take his survey to the next level, and begin to document specific features that are found on them.

After considering which questions I might think pertinent for the study of them, I thought it might be prudent to expand a survey to include the Long Playing models as well, before any more examples disappear forever.

In theory, this survey doesn't necessarily duplicate his work, and our hope is that those whom participated in the earlier list, will also take the time to submit additional information here.

As with the other surveys I maintain here at the forum, I will keep a detailed spreadsheet, and I will extend my research to include other sources of information, and the data will eventually be shared with the collecting/historical community for their use as a tool to help understand these archaic, and beloved Edison Diamond Disc Phonographs.

Please answer the following questions as accurately as possible:

1) What is the model? Schubert(CLT), Beethoven(BN), Long Playing console: 1-C, 2-C, 3-C, 4-C.

2) What is the serial number on the dataplate? "?????"

3) Is there a speed control knob present in the left hand corner of the motor-plate? "YES/NO"

4) What finish is present on the hardware and reproducer? "Gun-metal", "Gold", "Nickel"

5) Which reproducer(s) are present? "Regular", "Edisonic", "LP", "78 (or lateral) Adapter"

6) Does your Phonograph (Schubert/Beethoven owners) have the Long and Short gearing present? "YES/NO"

7) Does your Phonograph have the "10 and 12 inch" buttons present? "YES/NO"

8) Are there any other special attachments present: Such as; tone arm adapters, other soundboxes or reproducers, single or double reproducer holder, needle cups, or any other interesting additional features? Please list each with any observed manufacturer identification, if possible.

9) Are there any original documents or dealer identification with, or fastened to, your Phonograph? Please describe in detail with location if affixed to Phonograph.

10) What is the Cabinet Factory No. (if a sticker is present inside the horn compartment)? "Cabinet Factory No.???"

I appreciate your participation, and welcome any additional comments of interest.

Thank you,
Fran
Last edited by fran604g on Fri Dec 04, 2015 4:32 pm, edited 3 times in total.
Francis; "i" for him, "e" for her
"Even a blind squirrel finds a nut once in a while" - the unappreciative supervisor.

User avatar
fran604g
Victor VI
Posts: 3988
Joined: Mon Mar 04, 2013 2:22 pm
Personal Text: I'm Feeling Cranky
Location: Hemlock, NY

Re: Edisonic and Long Playing Consoles Survey

Post by fran604g »

I'll begin the fun with my recent acquisition:

1) What is the model? Schubert(CLT)

2) What is the serial number on the dataplate? 1844

3) Is there a speed control knob present in the left hand corner of the motor-plate? NO

4) What finish is present on the hardware and reproducer? Gun-metal

5) Which reproducer(s) are present? NONE

6) Does your Phonograph (Schubert/Beethoven owners) have the Long and Short gearing present? NO

7) Does your Phonograph have the "10 and 12 inch" buttons present? NO

8) Are there any other special attachments present, such as: NONE

9) Are there any original documents or dealer identification with, or fastened to, your Phonograph? NONE

10) What is the Cabinet Factory No. (if a sticker is present inside the horn compartment)? NONE

Fran
Francis; "i" for him, "e" for her
"Even a blind squirrel finds a nut once in a while" - the unappreciative supervisor.

User avatar
DGPros
Victor III
Posts: 502
Joined: Sun Apr 01, 2012 11:22 am
Personal Text: Gary
Location: Flemington NJ

Re: Edisonic and Long Playing Consoles Survey

Post by DGPros »

1) What is the model? Beethoven(BN)
2) What is the serial number on the dataplate? 1757
3) Is there a speed control knob present in the left hand corner of the motor-plate? NO

4) What finish is present on the hardware and reproducer? "Gun-metal"

5) Which reproducer(s) are present? "Regular", "Edisonic"

6) Does your Phonograph (Schubert/Beethoven owners) have the Long and Short gearing present? "YES"

7) Does your Phonograph have the "10 and 12 inch" buttons present? NO! sorry for the original oversight.

8) Are there any other special attachments present: Such as; tone arm adapters, other soundboxes or reproducers, single or double reproducer holder, needle cups, or any other interesting additional features? Please list each with any observed manufacturer identification, if possible. None

9) Are there any original documents or dealer identification with, or fastened to, your Phonograph? Please describe in detail with location if affixed to Phonograph. There are 2 numbers engraved on the bedplate. One looks like a SS#? See pictures below
10) What is the Cabinet Factory No. (if a sticker is present inside the horn compartment)? "Cabinet Factory No.18"
Attachments
2015-12-04 17.22.08.jpg
2015-12-04 17.22.00.jpg
Last edited by DGPros on Sat Dec 05, 2015 8:41 am, edited 1 time in total.
In short, is not liberty the freedom of every person to make full use of his faculties, so long as he does not harm other persons while doing so?
Frederic Bastiat

User avatar
fran604g
Victor VI
Posts: 3988
Joined: Mon Mar 04, 2013 2:22 pm
Personal Text: I'm Feeling Cranky
Location: Hemlock, NY

Re: Edisonic and Long Playing Consoles Survey

Post by fran604g »

Thank you, sir!

I'll add it to the spreadsheet.

Best,
Fran
Francis; "i" for him, "e" for her
"Even a blind squirrel finds a nut once in a while" - the unappreciative supervisor.

User avatar
marcapra
Victor V
Posts: 2180
Joined: Thu Jun 28, 2012 12:29 am
Personal Text: Man who ride on tiger find it very difficult to dismount! Charlie Chan
Location: Temecula, CA

Re: Edisonic and Long Playing Consoles Survey

Post by marcapra »

I was going to say that no Edisonic machine could have the 10" - 12" buttons on them because they work by having a feeler lever go down to touch the top part of the horn. On Edison Lab models or other Edison models before the Edisonics, the horns are located just under the motor boards. On Edisonics, the horns are mounted low down next to the floor of the horn compartment. So I would like to see a pic of the machine above that says that he does have these keys on his. If he does, then they would not work unless they have extra long feeler levers.

Thanks, Marc.

Wagnerian
Victor II
Posts: 295
Joined: Sun Mar 18, 2012 7:43 am
Location: United Kingdom

Re: Edisonic and Long Playing Consoles Survey

Post by Wagnerian »

Dear Fran,

From a very breezey United Kingdom:


1) What is the model? Long Playing console: 3-C,

2) What is the serial number on the dataplate? "1159"

3) Is there a speed control knob present in the left hand corner of the motor-plate? "YES"

4) What finish is present on the hardware and reproducer? "Gun-metal"

5) Which reproducer(s) are present? "Regular", "LP", "78 (and vertical) Adapter"

7) Does your Phonograph have the "10 and 12 inch" buttons present? "YES"

8) Are there any other special attachments present: double reproducer holder

9) Are there any original documents or dealer identification with, or fastened to, your Phonograph? Please describe in detail with location if affixed to Phonograph. No

10) What is the Cabinet Factory No. (if a sticker is present inside the horn compartment)? "Cabinet Factory No.18"

Plus a couple of photos:
Long Playing Console 3c 002.jpg
Long Playing Console 3c 003.jpg
Long Playing Console 3c 004.jpg
Long Playing Console 3c 005.jpg
Hope this helps

All the best

Tim W-W



Post Posted: Fri Dec 04, 2015 8:43 pm

User avatar
fran604g
Victor VI
Posts: 3988
Joined: Mon Mar 04, 2013 2:22 pm
Personal Text: I'm Feeling Cranky
Location: Hemlock, NY

Re: Edisonic and Long Playing Consoles Survey

Post by fran604g »

DGPros wrote: 7) Does your Phonograph have the "10 and 12 inch" buttons present? "YES"
marcapra wrote:I was going to say that no Edisonic machine could have the 10" - 12" buttons on them because they work by having a feeler lever go down to touch the top part of the horn. On Edison Lab models or other Edison models before the Edisonics, the horns are located just under the motor boards. On Edisonics, the horns are mounted low down next to the floor of the horn compartment. So I would like to see a pic of the machine above that says that he does have these keys on his. If he does, then they would not work unless they have extra long feeler levers.

Thanks, Marc.
Good catch, Marc! You're absolutely correct, this feature on a "Schubert" would necessitate some alterations of the typical cabinet construction, as well the 10 and 12 inch mechanism, as you point out.

I hadn't entered this data into my spreadsheet yet, but likely, I would have just blindly placed it into my database, and noticed the anomaly later on when reviewing my data. I'll PM him and ask him to re-examine his response.

Thank you,
Fran
Francis; "i" for him, "e" for her
"Even a blind squirrel finds a nut once in a while" - the unappreciative supervisor.

User avatar
fran604g
Victor VI
Posts: 3988
Joined: Mon Mar 04, 2013 2:22 pm
Personal Text: I'm Feeling Cranky
Location: Hemlock, NY

Re: Edisonic and Long Playing Consoles Survey

Post by fran604g »

Wagnerian wrote:Dear Fran,

From a very breezey United Kingdom:

Hope this helps

All the best

Tim W-W
Thank you, Tim. The complete "ensemble"! :)

It's always a treat to see pictures, I'm very happy that you took the time to include them!

Best,
Fran
Francis; "i" for him, "e" for her
"Even a blind squirrel finds a nut once in a while" - the unappreciative supervisor.

User avatar
DGPros
Victor III
Posts: 502
Joined: Sun Apr 01, 2012 11:22 am
Personal Text: Gary
Location: Flemington NJ

Re: Edisonic and Long Playing Consoles Survey

Post by DGPros »

marcapra wrote:I was going to say that no Edisonic machine could have the 10" - 12" buttons on them because they work by having a feeler lever go down to touch the top part of the horn. On Edison Lab models or other Edison models before the Edisonics, the horns are located just under the motor boards. On Edisonics, the horns are mounted low down next to the floor of the horn compartment. So I would like to see a pic of the machine above that says that he does have these keys on his. If he does, then they would not work unless they have extra long feeler levers.

Thanks, Marc.
Sorry, I got my long,short, 10,12 jumbled in my head :oops: You are correct there is no 10-12 on my BN
In short, is not liberty the freedom of every person to make full use of his faculties, so long as he does not harm other persons while doing so?
Frederic Bastiat

User avatar
fran604g
Victor VI
Posts: 3988
Joined: Mon Mar 04, 2013 2:22 pm
Personal Text: I'm Feeling Cranky
Location: Hemlock, NY

Re: Edisonic and Long Playing Consoles Survey

Post by fran604g »

DGPros wrote:
marcapra wrote:I was going to say that no Edisonic machine could have the 10" - 12" buttons on them because they work by having a feeler lever go down to touch the top part of the horn. On Edison Lab models or other Edison models before the Edisonics, the horns are located just under the motor boards. On Edisonics, the horns are mounted low down next to the floor of the horn compartment. So I would like to see a pic of the machine above that says that he does have these keys on his. If he does, then they would not work unless they have extra long feeler levers.

Thanks, Marc.
Sorry, I got my long,short, 10,12 jumbled in my head :oops: You are correct there is no 10-12 on my BN
Thank you DGPros, for the clarification.

Admittedly, I know literally nothing of the Beethoven model, so this is a good first lesson for me. I knew that the Schuberts had no inner trim piece surrounding the turntable, but didn't want to make the assumption that the same logic could be applied to the Beethoven.

Best,
Fran
Francis; "i" for him, "e" for her
"Even a blind squirrel finds a nut once in a while" - the unappreciative supervisor.

Post Reply