Page 1 of 3
Cylinder Transparencies
Posted: Mon Jan 26, 2009 8:45 pm
by Edisonfan
Everlasting Cylinder
Edison Cylinders 2M Gold Moulded
Re: Cylinder Transparencies
Posted: Tue Jan 27, 2009 3:46 am
by MordEth
Paul,
Thanks for the images (and starting this thread). Here is the first of (what I hope are many) cut-out cylinders:
Up until now, all of the cylinder images in the
stock avatar gallery were
Norman’s, but then—is that really any surprise from someone whose site is
The Cylinder Archive?
I’ll see what I can do with the other photo soon, and (to anyone who would like to see my work with one of their photos) feel free to reply with more images.
Your friendly internet
daemon,
Mord
Eth
Re: Cylinder Transparencies
Posted: Tue Jan 27, 2009 4:45 am
by Edisonfan
Your Welcome MorEdth,
I have another of that same cylinder case. However, I do have other Indestructible cylinders. Alas, they have no containers.
Paul
Re: Cylinder Transparencies
Posted: Tue Jan 27, 2009 5:10 am
by MordEth
Paul,
I currently have 3 Blue Amberols on a shelf (a remnant from
John’s YouTube videos that were recorded in my apartment), but alas, none of those cases have lids. I’ll have to see if he has any that are complete to photograph.
I may have some other things with which I can do some other images, as well.
At the moment, my organization is not quite what I wish it was.
— MordEth
Re: Cylinder Transparencies
Posted: Tue Jan 27, 2009 5:23 am
by Edisonfan
Ok!
Re: Cylinder Transparencies
Posted: Tue Jan 27, 2009 8:00 am
by MordEth
Shane,
You’re kidding, right?
I can and will use
ALL of those!
Eventually I’d like our cylinder avatars to not be so thin (in quantity) compared to the 78s—I know that getting them 1:1 is impossible, but they’re still under-represented.
And I know we have at least a
few cylinder fans here.
Thanks for the images!
— MordEth
Re: Cylinder Transparencies
Posted: Tue Jan 27, 2009 8:44 am
by MordEth
Shane,
Those images will work perfectly; for avatar-sized graphics, it’s not like I need a huge source image; I just like flaunting my larger cutouts in the threads.
Plus, most of what I have to offer everyone here is my technical and graphics skills, but a lot of my motivation is that I honestly
like playing with
Photoshop.
I think you’ll keep me busy for a while with these, but keep the images coming! (I’ll cut everything out eventually.)
— MordEth
Re: Cylinder Transparencies
Posted: Tue Jan 27, 2009 9:31 am
by MordEth
Okay, here’s the first of
Shane’s cylinders:
The
record label transparencies are definitely easier to cut.
— MordEth
Re: Cylinder Transparencies
Posted: Tue Jan 27, 2009 3:06 pm
by Aaron
I have some harder to find cylinder cases that i could take pictures of.But there is a problem i can never make them small enough to be used on the forum...can any one help?
Aaron
Re: Cylinder Transparencies
Posted: Tue Jan 27, 2009 3:27 pm
by Edisonfan
Try Imageshack @
http://www.imageshack.us
or Photobucket @
http://www.photobucket.com
They have the codes to place photos on froums. The host photos, for this sort of thing.
Paul