victrola governor weights
- travisgreyfox
- Victor IV
- Posts: 1157
- Joined: Sat Aug 12, 2017 9:25 pm
victrola governor weights
So I took apart my VV- XIV to clean everything off and I found a problem. It looks like (to me) that two governor weights somehow sheared off. Luckily I found one at the bottom of the machine. The other is not there. Is there anyone who sells this kind of thing? Anyway, I wanted to ask everyone's opinion. Are the "bars" that hold the weights suppose to be split in two or did these just break that way? You guys see this often?
-
- Victor Monarch Special
- Posts: 5347
- Joined: Mon Aug 24, 2009 3:08 pm
- Location: Southeast MI
Re: victrola governor weights
This is a common problem. Measure the length of the unbroken spring and search eBay for "victor governor" or "victrola governor". The springs are cheap. Right now, there are some weights with springs attached, however, I wouldn't pay the current asking price, but that's just me. Keep looking and a reasonable offering will surface.
-
- Victor Monarch Special
- Posts: 8516
- Joined: Tue Feb 10, 2009 11:25 am
- Personal Text: Stop for a visit when in Oregon.
- Location: Albany, Oregon
Re: victrola governor weights
It's just my "old guy" opinion but I'd skip eBay and go directly to the source where those sellers buy their items. Ron Sitko or Musical Americana can provide just about anything you need for your Victrola. Go to the "Links" section of our Forum and look for the "Repairs & Parts" listing.
Respectfully, Jerry Blais
Respectfully, Jerry Blais
- Curt A
- Victor Monarch Special
- Posts: 6435
- Joined: Fri Jul 09, 2010 8:32 pm
- Personal Text: Needle Tins are Addictive
- Location: Belmont, North Carolina
Re: victrola governor weights
One additional thought... When replacing governor springs and weights, replace all of them, not just the broken one. This insures that the governor will run in a balanced fashion and that the springs will have the same tension.
"The phonograph is not of any commercial value."
Thomas Alva Edison - Comment to his assistant, Samuel Insull.
"No one needs a Victrola XX, a Perfected Graphophone Type G, or whatever you call those noisy things."
My Wife
Thomas Alva Edison - Comment to his assistant, Samuel Insull.
"No one needs a Victrola XX, a Perfected Graphophone Type G, or whatever you call those noisy things."
My Wife
-
- Victor Monarch Special
- Posts: 8516
- Joined: Tue Feb 10, 2009 11:25 am
- Personal Text: Stop for a visit when in Oregon.
- Location: Albany, Oregon
Re: victrola governor weights
Perhaps I was hasty and incorrect in my response about most eBay sellers. I received the following pleasant reply to my post.
I may be an old guy but not too old to learn something new. Thanks, Jerry BlaisJerry,
You said, "I'd skip eBay and go directly to the source where those sellers buy their items."
I had to chuckle at that. It is inaccurate information and should be corrected. For the record, I (Walt Sommers) actually make, or have manufactured, most of the parts that I sell on eBay, but I'll bet you didn't know that?
Walt
- travisgreyfox
- Victor IV
- Posts: 1157
- Joined: Sat Aug 12, 2017 9:25 pm
Re: victrola governor weights
Thanks for all the invaluable information everyone. How'd you guys get anything done on these machines before the advent of the internet anyway??? A wondering millennial mind must know!
-
- Victor VI
- Posts: 3751
- Joined: Mon Oct 03, 2011 7:54 pm
Re: victrola governor weights
No, Jerry, your comment is neither hasty nor incorrect. While Walt may indeed make his own stuff, he is in the minority. There are many sellers who buy from Ron and relist his stuff on eBay. Most don't even bother repackaging things, which means that Ron's distinctive handwriting and stickers are clearly visible.Jerry B. wrote:Perhaps I was hasty and incorrect in my response about most eBay sellers. I received the following pleasant reply to my post.
I may be an old guy but not too old to learn something new. Thanks, Jerry BlaisJerry,
You said, "I'd skip eBay and go directly to the source where those sellers buy their items."
I had to chuckle at that. It is inaccurate information and should be corrected. For the record, I (Walt Sommers) actually make, or have manufactured, most of the parts that I sell on eBay, but I'll bet you didn't know that?
Walt
I have bought from both Walt and Ron and will continue to do so.
-
- Victor Monarch Special
- Posts: 5347
- Joined: Mon Aug 24, 2009 3:08 pm
- Location: Southeast MI
Re: victrola governor weights
We belonged to and participated in clubs. Called people on the phone. Ordered parts from catalogs and mailed in checks for them. Our "Social Media" was to actually socialize and speak face-to-face with human beings. I sound cynical, well I am. But, like others, I do use the internet, eBay, etc. and yes, it does make collecting & restoration somewhat easier, but not always as fun and challenging as it once was.travisgreyfox wrote:Thanks for all the invaluable information everyone. How'd you guys get anything done on these machines before the advent of the internet anyway??? A wondering millennial mind must know!
Enjoy your phonograph and visit us frequently here.