Hey all. I have an Edison A100 player and 2 DD reproducers as shown in photo. The one reproducer works fine. The other scratches and skips the records. I noticed the pivot pin is riding too low. Is there a way to adjust this on the reproducer itself? I also added another felt layer to the platter but didnt help much. Thanks!
Also, anyone know who sells the diamond stylus at a reasonable price?
Edison Reproducer Issue...Help!!
- pellicano1
- Victor II
- Posts: 486
- Joined: Thu Aug 24, 2017 6:59 pm
- Personal Text: The Phonograph Stop
- Location: Southern New Jersey
- Contact:
Edison Reproducer Issue...Help!!
- Attachments
-
- ddreproducer1.jpg (17.22 KiB) Viewed 668 times
I have not failed. I've just found 10,000 ways that won't work.
Thomas A. Edison
Thomas A. Edison
- Valecnik
- Victor VI
- Posts: 3829
- Joined: Sat Jan 10, 2009 3:28 pm
- Personal Text: Edison Records - Close your eyes and see if the artist does not actually seem to be before you.
- Location: Česká Republika
- Contact:
Re: Edison Reproducer Issue...Help!!
If one works fine and the other does not, your height is probably correct. It's likely that your stylus is toast and the reproducer needs in addition to a stylus, a new gaskets and a diaphragm.
Below is a link to a manual which explains how to adjust the height of your reproducer. However you adjust the height of the horn, no adjustments on the reproducer.
http://forum.talkingmachine.info/viewto ... ?f=2&t=476
Steve Medved has new styli and can do the rebuild for you. I sent you his email address by PM.
Below is a link to a manual which explains how to adjust the height of your reproducer. However you adjust the height of the horn, no adjustments on the reproducer.
http://forum.talkingmachine.info/viewto ... ?f=2&t=476
Steve Medved has new styli and can do the rebuild for you. I sent you his email address by PM.
- pellicano1
- Victor II
- Posts: 486
- Joined: Thu Aug 24, 2017 6:59 pm
- Personal Text: The Phonograph Stop
- Location: Southern New Jersey
- Contact:
Re: Edison Reproducer Issue...Help!!
Thank you for the help!
I have not failed. I've just found 10,000 ways that won't work.
Thomas A. Edison
Thomas A. Edison