Edison B-250 in Amberola Cabinet
-
- Victor IV
- Posts: 1383
- Joined: Sat Oct 24, 2015 10:46 pm
- Location: riverside calif
Re: Edison B-250 in Amberola Cabinet
would the horns be the same for the two phonographs??? Is it an amberola horn or a DD horn ?? They may not have changed the horn. Tom B
- phonogfp
- Victor Monarch Special
- Posts: 7400
- Joined: Wed Jan 07, 2009 5:08 pm
- Personal Text: "If you look for the bad in people expecting to find it, you surely will." - A. Lincoln
- Location: New York's Finger Lakes
Re: Edison B-250 in Amberola Cabinet
The horns are entirely different. The Amberola horn is gone, and the disc mechanism is equipped with a conventional DD horn.tomb wrote:would the horns be the same for the two phonographs??? Is it an amberola horn or a DD horn ?? They may not have changed the horn. Tom B
George P.
-
- Victor O
- Posts: 52
- Joined: Fri Sep 07, 2012 2:50 pm
- Contact:
Re: Edison B-250 in Amberola Cabinet
omg guys it is marriage and not factory at all...it is a hack job...lets be real...mark
- Valecnik
- Victor VI
- Posts: 3829
- Joined: Sat Jan 10, 2009 3:28 pm
- Personal Text: Edison Records - Close your eyes and see if the artist does not actually seem to be before you.
- Location: Česká Republika
- Contact:
Re: Edison B-250 in Amberola Cabinet
I don't think you are right Mark. That re-stamped serial no. plate...mark gaisser wrote:omg guys it is marriage and not factory at all...it is a hack job...lets be real...mark
-
- Victor O
- Posts: 52
- Joined: Fri Sep 07, 2012 2:50 pm
- Contact:
Re: Edison B-250 in Amberola Cabinet
dont't wish for christmas...no way does that hack job leave the factory...give edison credit for quality....mark
-
- Victor O
- Posts: 52
- Joined: Fri Sep 07, 2012 2:50 pm
- Contact:
Re: Edison B-250 in Amberola Cabinet
oh yea when it left the factory they threw in broken cylinders scraps....stop wishing and get in a realty mode...
-
- Victor IV
- Posts: 1429
- Joined: Wed May 20, 2009 8:20 pm
- Location: Mid - Michigan
Re: Edison B-250 in Amberola Cabinet
I own a 1A but have never owned a B250, so I have refrained from posting a partially informed opinion, at least until now. I don't think the ID plate is necessarily proof of authenticity because alpha/numeric stamping sets are not hard to find. Add to the fact that the style of the overstamped characters does not match the original and I see a problem here. It could have been done at the factory for in house use, but i can't believe anyone would have bothered with filling the extra crank hole, much less removing the plate, stamping it and reinstalling it. If they had wanted a specific ID for it they would most likely
have simply nailed on an inventory tag.
Jim
have simply nailed on an inventory tag.
Jim
-
- Victor III
- Posts: 816
- Joined: Thu Sep 25, 2014 4:25 pm
- Location: North Central Iowa
Re: Edison B-250 in Amberola Cabinet
I know a guy up in Minneapolis that has an A-250 where an Amberola cabinet was used as well and maybe he can add to this. His machine definitely has some oddball things about it. For one thing, the TERRIBLE job they did under the lid trying to cover up the Amberola decal. But I don't know about the ID tag and if that was overstamped to change the serial number. The did saw the ear off the lid and use that to fill the U shaped opening for the cylinder. It's odd some of the lengths that Edison went to use things up.
- Valecnik
- Victor VI
- Posts: 3829
- Joined: Sat Jan 10, 2009 3:28 pm
- Personal Text: Edison Records - Close your eyes and see if the artist does not actually seem to be before you.
- Location: Česká Republika
- Contact:
Re: Edison B-250 in Amberola Cabinet
EarlH wrote:I know a guy up in Minneapolis that has an A-250 where an Amberola cabinet was used as well and maybe he can add to this. His machine definitely has some oddball things about it. For one thing, the TERRIBLE job they did under the lid trying to cover up the Amberola decal. But I don't know about the ID tag and if that was overstamped to change the serial number. The did saw the ear off the lid and use that to fill the U shaped opening for the cylinder. It's odd some of the lengths that Edison went to use things up.
Correct Earl. There are multiple examples of A-250s. There's at least one converted B-250 posted somewhere here on the Forum with. It has the drawers. I have an A-300 made over from an Amberola 1 cabinet. See link below.
http://forum.talkingmachine.info/viewto ... ?f=2&t=537
Elements of the makeover are not so apparent in the pics but clearly visible in person. Whether Cliff's machine was done at the factory or not is debatable but I don't think the possibility can be dismissed.
- DGPros
- Victor III
- Posts: 502
- Joined: Sun Apr 01, 2012 11:22 am
- Personal Text: Gary
- Location: Flemington NJ
Re: Edison B-250 in Amberola Cabinet
I figured I would update my cleaning of the amb uuuh B-2 uuummm non binary machine. An ammonia bath and multiple goop sessions only done so far. From my take, and of course purely speculative, I do believe this was a factory switch over.
1) Cylinder brackets removed.
2) Holes for an amberola, (early hoof foot 1A cabinet) though crude would not be noticed under the bedplate. Any carpenter will tell you stories of professional jobs that were pretty crude when not in sight. Also see past posts on this site.
3) Broken 4 minute cylinder in the bottom of machine. Why would they remove the drawers to clean out the bottom if the drawers were staying?
4) Excellent job removing Amberola label and adding Edison.(matching lid, body #)
5) The wood trim around the bed plate. Very nicely done, surprised no one brought that up. Definitely not an amateur there.
6) The data plate.
7) Bedplate alteration on bracket.
Did I miss anything?
There does seem to appear an amateur fix at some point. The painting on the rim and bad job fixing the foot. I haven't touched that or the motor yet. Little scared to see whats under that tape. All in all an interesting machine. Thanks to all for their input on this. I hope you guys enjoyed this strange little puzzle as much as I did.
1) Cylinder brackets removed.
2) Holes for an amberola, (early hoof foot 1A cabinet) though crude would not be noticed under the bedplate. Any carpenter will tell you stories of professional jobs that were pretty crude when not in sight. Also see past posts on this site.
3) Broken 4 minute cylinder in the bottom of machine. Why would they remove the drawers to clean out the bottom if the drawers were staying?
4) Excellent job removing Amberola label and adding Edison.(matching lid, body #)
5) The wood trim around the bed plate. Very nicely done, surprised no one brought that up. Definitely not an amateur there.
6) The data plate.
7) Bedplate alteration on bracket.
Did I miss anything?
There does seem to appear an amateur fix at some point. The painting on the rim and bad job fixing the foot. I haven't touched that or the motor yet. Little scared to see whats under that tape. All in all an interesting machine. Thanks to all for their input on this. I hope you guys enjoyed this strange little puzzle as much as I did.
In short, is not liberty the freedom of every person to make full use of his faculties, so long as he does not harm other persons while doing so?
Frederic Bastiat
Frederic Bastiat