Edison Recorder Stylus Placement
- hearsedriver
- Victor III
- Posts: 571
- Joined: Wed Jan 25, 2017 10:21 pm
- Location: Ft.Worth, Texas
Edison Recorder Stylus Placement
The stylus on my Edison Recorder fell off and I wanted to ask if this is the correct placement for it. I cant tell if the end of the stylus holder is suppose to make contact with the metal ring that holds the diaphragm or not. There is a notch on the ring for some reason. Thanks
- WDC
- Victor IV
- Posts: 1015
- Joined: Thu Jan 08, 2009 5:07 am
Re: Edison Recorder Stylus Placement
Yes, the end is supposed to go in there and end with the rim. Rule of thumb: The tip of the cutting sapphire should be centered. Yours is a little beyond that point.