Need Horn Elbow for Victor II (morning glory horn)
-
- Victor IV
- Posts: 1313
- Joined: Sun Mar 08, 2009 12:23 am
Re: Need Horn Elbow for Victor II (morning glory horn)
Do you know about WIMAPS? It is a Wisconsin/Illinois based phonograph group. There are some very nice, fun and knowledgable folks in that group. Checkout http://www.wimaps.org/ .
-
- Victor Jr
- Posts: 20
- Joined: Sat Mar 17, 2018 12:05 pm
- Location: WI
Re: Need Horn Elbow for Victor II (morning glory horn)
That’s awesome, I’ll definitely have to check them out!melvind wrote:Do you know about WIMAPS? It is a Wisconsin/Illinois based phonograph group. There are some very nice, fun and knowledgable folks in that group. Checkout http://www.wimaps.org/ .
- Django
- Victor IV
- Posts: 1693
- Joined: Thu Apr 13, 2017 7:31 pm
- Location: New Hampshire’s West Coast
Re: Need Horn Elbow for Victor II (morning glory horn)
Hi and welcome. I may be having a senior moment here, but if you have a "witch's hat", doesn't that use the same elbow? Could you add some pictures? The end of the horn should be conical and have a short pin protruding. The elbow should have a slot that forms a ramp of sorts to wedge the horn into the elbow. The horn is removed by gently rotating the horn in the direction that allows the pin to move toward open area of the slot and toward the large end of the elbow. When the pin gets to the end of the slot it should pull straight out.lilnipper wrote:Hi all,
I'm new to the forum so I'm hoping that I'm doing this right. Anyways I just purchased a Victor II gramophone it came with the witches hat but I also bought a morning glory horn. However it didn't come with the horn elbow so I can't use it. Does anyone have a Victor II horn elbow for sale or any info on where to find one? Please let me know.
Thanks
-
- Victor Jr
- Posts: 20
- Joined: Sat Mar 17, 2018 12:05 pm
- Location: WI
Re: Need Horn Elbow for Victor II (morning glory horn)
Okay, well I’m brand new to this so I was unsure of how to detach the horn elbow without scratching the witches hat. Maybe I can try again.Django wrote:Hi and welcome. I may be having a senior moment here, but if you have a "witch's hat", doesn't that use the same elbow? Could you add some pictures? The end of the horn should be conical and have a short pin protruding. The elbow should have a slot that forms a ramp of sorts to wedge the horn into the elbow. The horn is removed by gently rotating the horn in the direction that allows the pin to move toward open area of the slot and toward the large end of the elbow. When the pin gets to the end of the slot it should pull straight out.lilnipper wrote:Hi all,
I'm new to the forum so I'm hoping that I'm doing this right. Anyways I just purchased a Victor II gramophone it came with the witches hat but I also bought a morning glory horn. However it didn't come with the horn elbow so I can't use it. Does anyone have a Victor II horn elbow for sale or any info on where to find one? Please let me know.
Thanks
- Django
- Victor IV
- Posts: 1693
- Joined: Thu Apr 13, 2017 7:31 pm
- Location: New Hampshire’s West Coast
Re: Need Horn Elbow for Victor II (morning glory horn)
We were all new at one time, so no worries. Pictures help. The first is with the horn secured. The second is with the horn rotated into the removal position, (counter clockwise). The third is lifted off. It may take a little gentle wiggling around to free the pin from the elbow and lift the horn off. Installation is just the reverse. Please post some pictures of your Victor II and horn. I like my II very much and play it often. It's an iconic machine. Good luck.lilnipper wrote:Okay, well I’m brand new to this so I was unsure of how to detach the horn elbow without scratching the witches hat. Maybe I can try again.Django wrote:Hi and welcome. I may be having a senior moment here, but if you have a "witch's hat", doesn't that use the same elbow? Could you add some pictures? The end of the horn should be conical and have a short pin protruding. The elbow should have a slot that forms a ramp of sorts to wedge the horn into the elbow. The horn is removed by gently rotating the horn in the direction that allows the pin to move toward open area of the slot and toward the large end of the elbow. When the pin gets to the end of the slot it should pull straight out.lilnipper wrote:Hi all,
I'm new to the forum so I'm hoping that I'm doing this right. Anyways I just purchased a Victor II gramophone it came with the witches hat but I also bought a morning glory horn. However it didn't come with the horn elbow so I can't use it. Does anyone have a Victor II horn elbow for sale or any info on where to find one? Please let me know.
Thanks
-
- Victor Jr
- Posts: 20
- Joined: Sat Mar 17, 2018 12:05 pm
- Location: WI
Re: Need Horn Elbow for Victor II (morning glory horn)
We were all new at one time, so no worries. Pictures help. The first is with the horn secured. The second is with the horn rotated into the removal position, (counter clockwise). The third is lifted off. It may take a little gentle wiggling around to free the pin from the elbow and lift the horn off. Installation is just the reverse. Please post some pictures of your Victor II and horn. I like my II very much and play it often. It's an iconic machine. Good luck.[/quote]lilnipper wrote:Hi all,
Okay, well I’m brand new to this so I was unsure of how to detach the horn elbow without scratching the witches hat. Maybe I can try again.
Hi there,
Thanks so much for the pics. Your morning glory horn is beautiful! From what I can see in the photos it looks like what I've already tried. Whenever I get to the third step where I twist it to lift off position it get's cause on the pin and doesn't come off. I'll take some pics to try and demonstrate and also to show off the machine.
-
- Victor Jr
- Posts: 20
- Joined: Sat Mar 17, 2018 12:05 pm
- Location: WI
Re: Need Horn Elbow for Victor II (morning glory horn)
Here’s how I have the horn elbow turned, it doesn’t seem to lift off. Perhaps I haven turned it too much ?
-
- Victor Jr
- Posts: 20
- Joined: Sat Mar 17, 2018 12:05 pm
- Location: WI
Re: Need Horn Elbow for Victor II (morning glory horn)
Here’s the base, I haven’t assembled the rest yet
-
- Victor Jr
- Posts: 20
- Joined: Sat Mar 17, 2018 12:05 pm
- Location: WI
Re: Need Horn Elbow for Victor II (morning glory horn)
Here’s the hmv decal on the witches hat, I believe it’s original.
-
- Victor Jr
- Posts: 20
- Joined: Sat Mar 17, 2018 12:05 pm
- Location: WI
Re: Need Horn Elbow for Victor II (morning glory horn)
The witches hat seems fairly free of major dings but has a bit of green rust spattered on the brass so I’ll need to restore it a little overall it seems to be in good shape.