I hope that I have posted this in the correct forum.
My question is very 'basic' I am afraid.
I am thinking about buying either an Edison Gem or Edison Standard Phonograph and am looking around and have learnt a bit about them.
I do not understand how they actually play a cylinder though. Do they have a replaceable needle in the reproducer for example like a 78 gramophone has or is it something else ? I can't imagine what else to be honest but I have no idea.
If the Edisons use needles do they need replacing and if so where do you buy them from ?
Thank you for any help / guidance you can give.
Edison Phonograph advice please
- poodling around
- Victor V
- Posts: 2158
- Joined: Tue Feb 20, 2018 11:52 am
- phonogfp
- Victor Monarch Special
- Posts: 7396
- Joined: Wed Jan 07, 2009 5:08 pm
- Personal Text: "If you look for the bad in people expecting to find it, you surely will." - A. Lincoln
- Location: New York's Finger Lakes
Re: Edison Phonograph advice please
Edison cylinder Phonographs such as the Gem and Standard use permanent sapphire styli that do not need replacement with each record. This was a big selling point at the time over disc-playing talking machines.
This article will show you a number of Edison and Columbia cylinder-type reproducers, and there's a photo of the underside of an Edison Model K reproducer (which contains two styli - one for 2-minute and one for 4-minute records):
https://www.antiquephono.org/basic-anti ... onal-tips/
If you're interested in playing cylinder records with your future Edison, I'd recommend a Standard over a Gem.
Good luck!
George P.
This article will show you a number of Edison and Columbia cylinder-type reproducers, and there's a photo of the underside of an Edison Model K reproducer (which contains two styli - one for 2-minute and one for 4-minute records):
https://www.antiquephono.org/basic-anti ... onal-tips/
If you're interested in playing cylinder records with your future Edison, I'd recommend a Standard over a Gem.
Good luck!
George P.
- poodling around
- Victor V
- Posts: 2158
- Joined: Tue Feb 20, 2018 11:52 am
Re: Edison Phonograph advice please
Brilliant ! Thank you very much for your advice and information.phonogfp wrote:Edison cylinder Phonographs such as the Gem and Standard use permanent sapphire styli that do not need replacement with each record. This was a big selling point at the time over disc-playing talking machines.
This article will show you a number of Edison and Columbia cylinder-type reproducers, and there's a photo of the underside of an Edison Model K reproducer (which contains two styli - one for 2-minute and one for 4-minute records):
https://www.antiquephono.org/basic-anti ... onal-tips/
If you're interested in playing cylinder records with your future Edison, I'd recommend a Standard over a Gem.
Good luck!
George P.
I will read the link page now and look out for a standard model.
- rgordon939
- Victor V
- Posts: 2571
- Joined: Tue Jan 10, 2012 2:41 pm
- Location: Linden, NJ 07036
- Contact:
Re: Edison Phonograph advice please
If this is your first machine I would suggest you buy a machine that plays both 2 minute and 4 minute cylinders. This way you can play all the cylinders you buy on one machine. As mentioned it will require the correct reproducer / reproducers. Common reproducers are B and C both 2 minute, an H that’s 4 minute, and K that’s both 2&4 minute. Good luck with your endeavor.
Rich Gordon
Rich Gordon
-
- Victor Monarch Special
- Posts: 5326
- Joined: Mon Aug 24, 2009 3:08 pm
- Location: Southeast MI
Re: Edison Phonograph advice please
If properly cared for, Edison styli can be good for many thousands of plays.
-
- Victor I
- Posts: 170
- Joined: Tue Sep 19, 2017 10:30 am
Re: Edison Phonograph advice please
I agree with Rich Gordon. For your fist cylinder machine I would recommend something with factory combination gearing and both a model c and h reproducer. That way you can play both two and four minute wax or celluloid cylinders on your machine. I prefer the machines with the factory combination gearing over machines that have had it added with perhaps the except of the home and triumph machines as the attachments with combination gearing on the standards tend to be a little noisy and they can be finicky to get to work properly. Also, as they are an add on they can come loose. In my opinion the ideal starter machine would either be an Edison standard model D or a fireside model A. Both machines came from the factory with 2 and 4 minute gearing and are very reliable and compact machines and are perfect for someone who is just getting started in cylinders. They're also pretty easy to find and are fairly cheap.
Stephen
Stephen
- poodling around
- Victor V
- Posts: 2158
- Joined: Tue Feb 20, 2018 11:52 am
Re: Edison Phonograph advice please
rgordon939 wrote:If this is your first machine I would suggest you buy a machine that plays both 2 minute and 4 minute cylinders. This way you can play all the cylinders you buy on one machine. As mentioned it will require the correct reproducer / reproducers. Common reproducers are B and C both 2 minute, an H that’s 4 minute, and K that’s both 2&4 minute. Good luck with your endeavor.
Rich Gordon
Thank you for the good advice Rich.
- poodling around
- Victor V
- Posts: 2158
- Joined: Tue Feb 20, 2018 11:52 am
Re: Edison Phonograph advice please
JerryVan wrote:If properly cared for, Edison styli can be good for many thousands of plays.
Thank you for the information.
- poodling around
- Victor V
- Posts: 2158
- Joined: Tue Feb 20, 2018 11:52 am
Re: Edison Phonograph advice please
Very good Thank you Stephen.Stephen_Heatherly wrote:I agree with Rich Gordon. For your fist cylinder machine I would recommend something with factory combination gearing and both a model c and h reproducer. That way you can play both two and four minute wax or celluloid cylinders on your machine. I prefer the machines with the factory combination gearing over machines that have had it added with perhaps the except of the home and triumph machines as the attachments with combination gearing on the standards tend to be a little noisy and they can be finicky to get to work properly. Also, as they are an add on they can come loose. In my opinion the ideal starter machine would either be an Edison standard model D or a fireside model A. Both machines came from the factory with 2 and 4 minute gearing and are very reliable and compact machines and are perfect for someone who is just getting started in cylinders. They're also pretty easy to find and are fairly cheap.
Stephen
-
- Victor II
- Posts: 243
- Joined: Sun Jul 30, 2017 5:28 pm
- Location: Deltona FL / Brampton ON
Re: Edison Phonograph advice please
I second the choice of a Model "D" or if you are lucky enough to find a Model "F" with the S Reproducer which plays 2/4 min. at a more pleasant sound.poodling around wrote:Very good Thank you Stephen.Stephen_Heatherly wrote:I agree with Rich Gordon. For your fist cylinder machine I would recommend something with factory combination gearing and both a model c and h reproducer. That way you can play both two and four minute wax or celluloid cylinders on your machine. I prefer the machines with the factory combination gearing over machines that have had it added with perhaps the except of the home and triumph machines as the attachments with combination gearing on the standards tend to be a little noisy and they can be finicky to get to work properly. Also, as they are an add on they can come loose. In my opinion the ideal starter machine would either be an Edison standard model D or a fireside model A. Both machines came from the factory with 2 and 4 minute gearing and are very reliable and compact machines and are perfect for someone who is just getting started in cylinders. They're also pretty easy to find and are fairly cheap.
Stephen