So I finally purchased one of these machines! I bought it at an online auction and thought I did well for buying a "completely restored and working" example.
Now for the bad news: it is not restored and definitely not working I do not know anything about repairing edisons so wanted to come get some advice on where to start. As soon as I put the reproducer down on the record it slows to a crawl. Nothing seems to be obviously out of place or broken(according to my limited knowledge). The only thing I did was clean/grease the reproducer and horn pivot points so that the reproducer glides more smoothly, which didn't help the issue.
Any advice and where to start would be appreciated.
New Amberola (to me)
- travisgreyfox
- Victor IV
- Posts: 1157
- Joined: Sat Aug 12, 2017 9:25 pm
- travisgreyfox
- Victor IV
- Posts: 1157
- Joined: Sat Aug 12, 2017 9:25 pm
Re: New Amberola (to me)
Oh I also contacted the auction house and explained how I paid for (at the very least) a working model and he said I must have broke it traveling
Here are some more pics of the machine without the motor removed. I will probably take the motor out to look at it my next day off.
Here are some more pics of the machine without the motor removed. I will probably take the motor out to look at it my next day off.
- rgordon939
- Victor V
- Posts: 2577
- Joined: Tue Jan 10, 2012 2:41 pm
- Location: Linden, NJ 07036
- Contact:
Re: New Amberola (to me)
Where are you located?
Rich Gordon
Rich Gordon
-
- Victor Monarch Special
- Posts: 5345
- Joined: Mon Aug 24, 2009 3:08 pm
- Location: Southeast MI
Re: New Amberola (to me)
Are you 100% sure that the machine pictured in the auction page is the one you received? I ask because the top board that surrounds the upper works, in your photo, is a light colored oak veneer in a mahogany cabinet, while the one shown on the auction page appears to have a dark colored mahogany top board.
-
- Victor Monarch Special
- Posts: 8516
- Joined: Tue Feb 10, 2009 11:25 am
- Personal Text: Stop for a visit when in Oregon.
- Location: Albany, Oregon
Re: New Amberola (to me)
I agree with JerryVan. I see a mixture of oak and mahogany. That raises questions. With that said, I suspect the half nut adjustment with the feed screw is slightly out of adjustment. I don't have a similar Amberola to make suggestions. Perhaps another member could help. It's a simple adjustment that could make a huge difference.
Jerry B.
Jerry B.
- travisgreyfox
- Victor IV
- Posts: 1157
- Joined: Sat Aug 12, 2017 9:25 pm
Re: New Amberola (to me)
I am located not too far from Pittsburgh, Rich.
I believe this is the same one that was pictured from the auction. I will include pics from the auction house and I can take better photos when I get home. To me it looks like the machine is a hodgepodge of various parts (or at least the screws and how the motor is mounted on). On the bright side, the outside cleaned up really nice.
Does anybody know of a good YouTube video on how to adjust the half nut adjustment with the feed screw?
Thanks everyone.
I believe this is the same one that was pictured from the auction. I will include pics from the auction house and I can take better photos when I get home. To me it looks like the machine is a hodgepodge of various parts (or at least the screws and how the motor is mounted on). On the bright side, the outside cleaned up really nice.
Does anybody know of a good YouTube video on how to adjust the half nut adjustment with the feed screw?
Thanks everyone.
- epigramophone
- Victor Monarch Special
- Posts: 5235
- Joined: Mon Oct 24, 2011 1:21 pm
- Personal Text: An analogue relic trapped in a digital world.
- Location: The Somerset Levels, UK.
Re: New Amberola (to me)
The auctioneers described the machine as an "Amberola Floor Model 60." There is no such machine.
The Amberola 60 (shown below) is a table model. The machine which you have is an Amberola 75.
Unfortunately most auction houses impose such restrictive terms and conditions that it is difficult to seek redress.
The Amberola 60 (shown below) is a table model. The machine which you have is an Amberola 75.
Unfortunately most auction houses impose such restrictive terms and conditions that it is difficult to seek redress.
- Attachments
-
- Amberola 60.jpg (245.21 KiB) Viewed 1554 times
- Curt A
- Victor Monarch Special
- Posts: 6435
- Joined: Fri Jul 09, 2010 8:32 pm
- Personal Text: Needle Tins are Addictive
- Location: Belmont, North Carolina
Re: New Amberola (to me)
I had the same machine (Amberola 75) with a similar problem. As I remember it, it was a simple adjustment, like loosening the collar at the end of the mandrel which was too tight...
"The phonograph is not of any commercial value."
Thomas Alva Edison - Comment to his assistant, Samuel Insull.
"No one needs a Victrola XX, a Perfected Graphophone Type G, or whatever you call those noisy things."
My Wife
Thomas Alva Edison - Comment to his assistant, Samuel Insull.
"No one needs a Victrola XX, a Perfected Graphophone Type G, or whatever you call those noisy things."
My Wife
- drh
- Victor IV
- Posts: 1218
- Joined: Tue May 27, 2014 12:24 pm
- Personal Text: A Pathé record...with care will live to speak to your grandchildren when they are as old as you are
- Location: Silver Spring, MD
Re: New Amberola (to me)
Something's off--the first of your photos of the reproducer shows it secured with thumb screws, as it should be; the second and subsequent show it secured by slot-head screws. Two different machines?
Very sorry you're having frustration with what should be an exciting new toy.
Very sorry you're having frustration with what should be an exciting new toy.
- Dischoard
- Victor II
- Posts: 498
- Joined: Tue Feb 16, 2021 11:41 pm
- Personal Text: Born in the wrong century...
- Location: St. Albans, Vermont
Re: New Amberola (to me)
Ah yes, that first photo shows an oak motorboard and reproducer with thumb screws, I think that's the image that threw things off in the beginning. Could this have been downloaded earlier for reference and accidentally uploaded with pictures of your own machine?