Vv 2-60 question.
-
- Victor V
- Posts: 2423
- Joined: Fri May 26, 2017 10:15 pm
- Location: A small town near Omaha, Nebraska
Vv 2-60 question.
Ok, so I aquired a Vv 2-60 portable. The tonearm bracket was bad so I epoxied it. But this tonearm pin left by the pervious owner does not fit. I’m assuming it’s the wrong pin. If it is, can you show me what the correct pin looks like? Thanks!
-
- Victor II
- Posts: 391
- Joined: Thu May 03, 2018 2:03 pm
- Location: SF Bay Area
Re: Vv 2-60 question.
Looks correct...should be gold for the 2-60 .....how was the 4A reproducer ?,useually pot metal and warped cracked
-
- Victor V
- Posts: 2423
- Joined: Fri May 26, 2017 10:15 pm
- Location: A small town near Omaha, Nebraska
Re: Vv 2-60 question.
I cannot get it through the bottom hole to the top of the tonearm because the pin is too large. The 4A is cracked but still playable. (For now lol)Vinrage_mania wrote:Looks correct...should be gold for the 2-60 .....how was the 4A reproducer ?,useually pot metal and warped cracked
-
- Victor II
- Posts: 391
- Joined: Thu May 03, 2018 2:03 pm
- Location: SF Bay Area
Re: Vv 2-60 question.
AmberolaAndy wrote:I cannot get it through the bottom hole to the top of the tonearm because the pin is too large. The 4A is cracked but still playable. (For now lol)Vinrage_mania wrote:Looks correct...should be gold for the 2-60 .....how was the 4A reproducer ?,useually pot metal and warped cracked
Here is mine taper more at the point,mine sticks up a small amount too ...and the bracket is swollen a bit
-
- Victor V
- Posts: 2423
- Joined: Fri May 26, 2017 10:15 pm
- Location: A small town near Omaha, Nebraska
-
- Victor II
- Posts: 391
- Joined: Thu May 03, 2018 2:03 pm
- Location: SF Bay Area
Re: Vv 2-60 question.
Yours looks slimmer ?? Maybe not my calipers have a dead battery or i would measure it
-
- Victor II
- Posts: 391
- Joined: Thu May 03, 2018 2:03 pm
- Location: SF Bay Area
-
- Victor V
- Posts: 2423
- Joined: Fri May 26, 2017 10:15 pm
- Location: A small town near Omaha, Nebraska
Re: Vv 2-60 question.
And here’s mine!Vinrage_mania wrote:Pot Metal never swells or cracks!....NOT! Here is mine plays tho
-
- Victor V
- Posts: 2423
- Joined: Fri May 26, 2017 10:15 pm
- Location: A small town near Omaha, Nebraska
Re: Vv 2-60 question.
Well, the epoxy part broke off again! I guess I’m gonna give up the ghost and just get a new replacement bracket.
-
- Victor II
- Posts: 391
- Joined: Thu May 03, 2018 2:03 pm
- Location: SF Bay Area
Re: Vv 2-60 question.
Mine is okay so far do they make a repro?? Never looked or asked bet all the originals are bad!