Recoton needles

Discussions on Talking Machines & Accessories
Post Reply
ldelin
Victor Jr
Posts: 26
Joined: Sun Sep 02, 2012 3:02 pm

Recoton needles

Post by ldelin »

I received some "Recoton" needles with a machine I bought. They are tapered down to a slender tip and the package says they are good for about twelve sides each. They sound pretty good. Does anyone know anything about these needles?
Attachments
recoton.jpg

52089
Victor VI
Posts: 3748
Joined: Mon Oct 03, 2011 7:54 pm

Re: Recoton needles

Post by 52089 »

There have been past discussions about this and similar long-life needles. Here's one such thread:

http://forum.talkingmachine.info/viewto ... it=recoton

User avatar
gramophone-georg
Victor VI
Posts: 3992
Joined: Mon Jan 20, 2014 11:55 pm
Personal Text: Northwest Of Normal
Location: Eugene/ Springfield Oregon USA

Re: Recoton needles

Post by gramophone-georg »

52089 wrote:There have been past discussions about this and similar long-life needles. Here's one such thread:

http://forum.talkingmachine.info/viewto ... it=recoton
Problem is... that thread is a lot about changers and really nothing about these needles.

I searched for info on these and there's not much out there.
"He who dies with the most shellac wins"- some nutty record geek

I got PTSD from Peter F's avatar

User avatar
CharliePhono
Victor III
Posts: 788
Joined: Fri Sep 30, 2016 2:41 pm
Personal Text: "The kerosene record player is not a very efficient device." ~Frank Zappa
Location: North Fork, CA

Re: Recoton needles

Post by CharliePhono »

Whether anecdotal or not, my understanding is the Recoton needles marketed in the States were made by Laubscher in Switzerland. I grab Laubscher needles any time I can find them; they are truly, to me, the Rolls of needles. No matter what the blurb says about the number of plays, the usual proviso applies here of using the point once only, then discard. I have also heard (or read somewhere) that some Decca needles were also manufactured by Laubscher.

OrthoFan
Victor V
Posts: 2181
Joined: Sat Jul 09, 2016 7:12 pm

Re: Recoton needles

Post by OrthoFan »

Seems like Recoton Corp. was founded in 1936 -- http://audiotools.com/en_dead_recoton.html-- well after electrically amplified systems had taken over in the US--except for portable models. I'd suspect you could safely get 12 sides from a lighter weight electric pickup of the period, but wouldn't advise more than a couple of sides from an older all-acoustic model.

OrthoFan

User avatar
CharliePhono
Victor III
Posts: 788
Joined: Fri Sep 30, 2016 2:41 pm
Personal Text: "The kerosene record player is not a very efficient device." ~Frank Zappa
Location: North Fork, CA

Re: Recoton needles

Post by CharliePhono »

As a P.S., I did find this blurb from a 1985 issue of the Antique Phonograph Monthly:

"Laubscher (Swiss)
phonograph needles, filter-
tip, good for 10-12 plays ea.
Originally sold in this coun-
try under the Recoton label."

EdiBrunsVic
Victor IV
Posts: 1062
Joined: Mon Jun 28, 2010 12:12 pm
Location: Cranberry Township, PA

Re: Recoton needles

Post by EdiBrunsVic »

I also like this brand and use them.

kkp1958
Victor Jr
Posts: 1
Joined: Sun Jul 17, 2022 2:06 pm

Re: Recoton needles

Post by kkp1958 »

I recently purchased a 1917 Victor Victrola XI that came with 3 Types of Needles.
1. Steel Needle (Single record side use).
2. Tungs-tone Stylus (60 record side use).
3. Recoton Phoneedle (12 record side use).

The ones that seem to work the best are Recoton Phoneedles.
The Recoton Phoneedles were made about 1936 by Laubscher in Switzerland.

attachment=0]Recoton Phoneedles (1930).jpg[/attachment]

My Two Questions, which I cannot find the answers to are:
1. What Material are these Recoton Phoneedles made of ?
2. Should I use these Recoton Phoneedles on my 1917 Victor Victrola XI Records ?

Any help would be greatly appreciated.
Attachments
Recoton Phoneedles (1930).jpg

Post Reply