I HAVE BEEN TRYING TO FIND A SET OF WRENCHES ONLINE THAT WILL WORK WITH THE VARIOUS NUT SIZES ON DIFFERENT REPRODUCERS/SOUND BOXES. THE SET SHOWN WITH THIS POST HAS ONLY ONE WRENCH THAT WILL WORK ON A GENERIC REPRODUCER.
CAN ANYONE SUGGEST WHERE TO GET A COMPREHENSIVE SET OR LIST THE COMMON SIZES?
THANKS.
DEAN
Need wrenches for reproducer work.
- toydk
- Victor O
- Posts: 90
- Joined: Wed Jan 25, 2017 9:05 am
- Location: Iowa
-
- Victor VI
- Posts: 3745
- Joined: Mon Oct 03, 2011 7:54 pm
Re: Need wrenches for reproducer work.
Yes, APSCO sells small wrenches made for the tiny nuts on Victor Exhibition and No. 2 reproducers.
http://www.antiquephono.com/victor.htm
http://www.antiquephono.com/victor.htm
-
- Victor VI
- Posts: 3718
- Joined: Tue Mar 23, 2010 7:00 pm
- Location: Western, WA State
Re: Need wrenches for reproducer work.
Are they still in business? It's been a while since I bought from them, because they don't return phone calls and such. A good hobby shop might have those wrenches. Maybe Ron Sitko, too.
Harvey Kravitz
Harvey Kravitz
52089 wrote:Yes, APSCO sells small wrenches made for the tiny nuts on Victor Exhibition and No. 2 reproducers.
http://www.antiquephono.com/victor.htm
-
- Victor V
- Posts: 2693
- Joined: Fri Nov 18, 2011 11:23 pm
- Location: NW Indiana VV-IV;
Re: Need wrenches for reproducer work.
I think APSCO is still in business. Sometimes you have to leave a message.
- toydk
- Victor O
- Posts: 90
- Joined: Wed Jan 25, 2017 9:05 am
- Location: Iowa
Re: Need wrenches for reproducer work.
THANKS FOR THE SUGGESTIONS. I’LL CHECK INTO THEM.