I saw this on eBay and it is described as a brass reproducer. I thought the Victor brass orthophonic reproducers had one less “slot” on top than the pot metal reproducers. This seems to have the same number as the pot metal reproducers. So is it indeed brass?
Thanks,
Dean
Could this be a BRASS orthophonic reproducer?
- toydk
- Victor O
- Posts: 90
- Joined: Wed Jan 25, 2017 9:05 am
- Location: Iowa
Could this be a BRASS orthophonic reproducer?
- Attachments
-
- 49D7A674-6089-4AC2-B482-BA819C13CE43.jpeg (33.31 KiB) Viewed 691 times
-
- Victor I
- Posts: 153
- Joined: Mon Mar 05, 2018 5:50 pm
- Personal Text: to own an electrola is a blessing
- Location: northeast nj
Re: Could this be a BRASS orthophonic reproducer?
No,toydk wrote:I saw this on eBay and it is described as a brass reproducer. I thought the Victor brass orthophonic reproducers had one less “slot” on top than the pot metal reproducers. This seems to have the same number as the pot metal reproducers. So is it indeed brass?
Thanks,
Dean
the brass ones have 7 openings and the needle bar assembly is a separate piece,not part of the casting
- toydk
- Victor O
- Posts: 90
- Joined: Wed Jan 25, 2017 9:05 am
- Location: Iowa