Cleaned my Amberola 50 with GoJo What can I do next?....

Discussions on Talking Machines & Accessories
Post Reply
MikeT1970
Victor Jr
Posts: 5
Joined: Sat Feb 10, 2018 9:12 pm
Location: Fond du Lac, WI

Cleaned my Amberola 50 with GoJo What can I do next?....

Post by MikeT1970 »

So I cleaned all the surface oils and grease from an Amberola 50 I recently purchased from a friend. The Go Jo did a nice job. I wanted to get some furniture polish and wipe it down and put it all back together but was wondering what you might do differently to make the wood POP! before I finish it and put it all together and back in it's location in my home?
I don't know what to use that's safe for Shellac finish.. (I assume it's shellac finish due to it's age)
Thanks for any suggestions!
Attachments
Just need your input before I put back together!
Just need your input before I put back together!

User avatar
AZ*
Victor IV
Posts: 1143
Joined: Thu Jan 15, 2009 8:51 pm
Location: USA

Re: Cleaned my Amberola 50 with GoJo What can I do next?....

Post by AZ* »

For my Edison B60, I achieved nice results with Briwax. I used the Golden Oak color which darkened it slightly (which is what I wanted), but if you are satisfied with the color as is, you could use the clear.

I'm sure you will get other replies. Many here seem to like Howard's Feed and Wax. I've used it also.
Best regards ... AZ*

MikeT1970
Victor Jr
Posts: 5
Joined: Sat Feb 10, 2018 9:12 pm
Location: Fond du Lac, WI

Re: Cleaned my Amberola 50 with GoJo What can I do next?....

Post by MikeT1970 »

Thanks for your recommendation AZ!! :)

Post Reply