You might try searching ebay for "vintage derby wheels". Not exact but similar. I'm not sure what diameter you need but there are several sizes available.
https://www.ebay.com/itm/4-Vintage-Offi ... :rk:6:pf:0
Victrola 8-7 wheels
-
- Victor O
- Posts: 55
- Joined: Sun Apr 26, 2009 9:37 pm
-
- Victor Monarch Special
- Posts: 8515
- Joined: Tue Feb 10, 2009 11:25 am
- Personal Text: Stop for a visit when in Oregon.
- Location: Albany, Oregon
Re: Victrola 8-7 wheels
Great, now we can have Victrola races.
Jerry B.
Jerry B.
-
- Victor III
- Posts: 516
- Joined: Sat Oct 14, 2017 5:40 pm
- Personal Text: Greg
- Location: Central Maryland
Re: Victrola 8-7 wheels
:lol: that would be something!Jerry B. wrote:Great, now we can have Victrola races.
Jerry B.
-
- Victor III
- Posts: 516
- Joined: Sat Oct 14, 2017 5:40 pm
- Personal Text: Greg
- Location: Central Maryland
Re: Victrola 8-7 wheels
Happy New Year everyone! I'm happy to report that I got the parts I needed for Christmas, so I've spent some time this break working on setting the veneer back down and further cleaning the finish. I'm very happy thus far!
-
- Victor III
- Posts: 516
- Joined: Sat Oct 14, 2017 5:40 pm
- Personal Text: Greg
- Location: Central Maryland
Re: Victrola 8-7 wheels
Photos:
A big thanks to EarlH who tipped me off about the listing.
A big thanks to EarlH who tipped me off about the listing.
- PeterF
- Victor IV
- Posts: 1913
- Joined: Sun Jul 08, 2012 1:06 pm
Re: Victrola 8-7 wheels
What a handsome machine. I would not change that tonearm patina in the slightest.
- PeterF
- Victor IV
- Posts: 1913
- Joined: Sun Jul 08, 2012 1:06 pm
Re: Victrola 8-7 wheels
This motivates me to get working on my 8-8 and get it into the house. There is currently a machine on wheels in here, a 9-40 on a large 4-wheel flat dolly, but it’s still kinda hard to wheel it from room to room.
As Dr. Blais will attest, 9-40s on only two wheels are less than optimal.
I’ll soon tell THAT story on a separate thread.
As Dr. Blais will attest, 9-40s on only two wheels are less than optimal.
I’ll soon tell THAT story on a separate thread.
-
- Victor III
- Posts: 516
- Joined: Sat Oct 14, 2017 5:40 pm
- Personal Text: Greg
- Location: Central Maryland
Re: Victrola 8-7 wheels
Thanks for the kind words! The 8-8 is also a really nice machine, and might be worth being featured in a topic of its own. I’m sure the 9-40 is quite heavy on wheels!
- PeterF
- Victor IV
- Posts: 1913
- Joined: Sun Jul 08, 2012 1:06 pm
Re: Victrola 8-7 wheels
Considering shipping it to the moon, where it will be a bit more manageable, although it won’t sound as good.
-
- Victor III
- Posts: 816
- Joined: Thu Sep 25, 2014 4:25 pm
- Location: North Central Iowa
Re: Victrola 8-7 wheels
Victor sure picked out some nice quarter sawn oak for that cabinet, didn't they? It's a nice looking machine Greg. I think you did good on that one.
As far as those HUGE electrolas go, "Weight means tone!" I read that in an old radio ad a long time ago. I have a couple of stripped out 9-40 cabinets around here and use one as a work bench. Man that stuff is heavy. My Dad's step-grandmother owned the Vance Music Company here in town and her son Bill, that married my Dad's mother was talking to me about how they sold pianos, Victrolas and the like back when he was young and they did feel that weight meant quality. He told me once, "If you don't know anything else about a piano go lift up one end of it. If it feels like they screwed it to the floor, it's a good one!" Bill was a funny guy. He also was really impressed with the orthophonic machines. Especially the one's that were "big enough to take a bath in the horn..."
I usually take a sheet of plywood and put some castors under it for those large machines. For $25 it makes them a lot easier to handle. And put some strips of wood on the corners so you don't push the thing off the top of it. Good luck with your projects. Most of the projects I get tangled up in end up being way more time consuming than I thought they would be. Oh well. Earl.
As far as those HUGE electrolas go, "Weight means tone!" I read that in an old radio ad a long time ago. I have a couple of stripped out 9-40 cabinets around here and use one as a work bench. Man that stuff is heavy. My Dad's step-grandmother owned the Vance Music Company here in town and her son Bill, that married my Dad's mother was talking to me about how they sold pianos, Victrolas and the like back when he was young and they did feel that weight meant quality. He told me once, "If you don't know anything else about a piano go lift up one end of it. If it feels like they screwed it to the floor, it's a good one!" Bill was a funny guy. He also was really impressed with the orthophonic machines. Especially the one's that were "big enough to take a bath in the horn..."
I usually take a sheet of plywood and put some castors under it for those large machines. For $25 it makes them a lot easier to handle. And put some strips of wood on the corners so you don't push the thing off the top of it. Good luck with your projects. Most of the projects I get tangled up in end up being way more time consuming than I thought they would be. Oh well. Earl.