Seller is not very cooperative and before I plunk my money down I would like to know what it is....
Pictures are great but you can see the tone arm and general over view....I am thinking it is vintage and not a repro but could be a mash up of parts?
Help with an ID?
- Cooljjay
- Victor Jr
- Posts: 20
- Joined: Tue Jul 28, 2009 12:09 am
- Contact:
-
- Victor Monarch Special
- Posts: 8516
- Joined: Tue Feb 10, 2009 11:25 am
- Personal Text: Stop for a visit when in Oregon.
- Location: Albany, Oregon
Re: Help with an ID?
I believe it's a late Zonophone built when Victor owned Zonophone. Zonophones were marketed to complete with the Columbia line. After all, how could anything compete with a Victor? It's actually a factory marriage of a Victor Junior with a Zonophone back bracket, reproducer, tone arm, and elbow. It may have been assembled to sell as an export. Personally, I think it's a desirable outfit and 100% correct.
Jerry Blais
Jerry Blais
- Cooljjay
- Victor Jr
- Posts: 20
- Joined: Tue Jul 28, 2009 12:09 am
- Contact:
Re: Help with an ID?
Thanks! I knew you guys could ID in a minute...
I guess this is why I was having an issue finding the machine...
I guess this is why I was having an issue finding the machine...
-
- Victor IV
- Posts: 1065
- Joined: Mon Jun 28, 2010 12:12 pm
- Location: Cranberry Township, PA
Re: Help with an ID?
If I were thinking about buying it I would bring an acoustic record, new needle, and see how it plays.
-
- Victor IV
- Posts: 1199
- Joined: Mon Apr 26, 2010 3:13 pm
Re: Help with an ID?
Nice machine- I concur with Jerry- late Zonophone... Look carefully at the horn/elbow connection-- In the pic it looks like there is putty or something at that connection-- Look at the type of connection to make sure the horn looks to be correct to the machine. It all looks to be in very nice, restorable condition.
Brad Abell
Brad Abell
- Phono-Phan
- Victor V
- Posts: 2479
- Joined: Fri Apr 06, 2012 9:38 pm
- Location: Plover, WI
Re: Help with an ID?
I remember seeing something like this in an old Sears ad. It may be an Oxford?
- Cooljjay
- Victor Jr
- Posts: 20
- Joined: Tue Jul 28, 2009 12:09 am
- Contact:
Re: Help with an ID?
I know, the seller said that the horn started to come apart and they "repaired" it I have no idea what they used to repair it and how it can be removed...outune wrote:Nice machine- I concur with Jerry- late Zonophone... Look carefully at the horn/elbow connection-- In the pic it looks like there is putty or something at that connection-- Look at the type of connection to make sure the horn looks to be correct to the machine. It all looks to be in very nice, restorable condition.
Brad Abell
-
- Victor Monarch Special
- Posts: 8516
- Joined: Tue Feb 10, 2009 11:25 am
- Personal Text: Stop for a visit when in Oregon.
- Location: Albany, Oregon
Re: Help with an ID?
Several of the least expensive Zonophone rear mount machines came with the horn and elbow in a fixed non-swivel position. I suspect the machine in the photo is one with a fixed position horn. I've owned one and it is natural to attempt to move the horn to the left to change the record or needle. It's quite possible that the horn came out of the elbow after such an effort. Jerry BlaisNice machine- I concur with Jerry- late Zonophone... Look carefully at the horn/elbow connection-- In the pic it looks like there is putty or something at that connection-- Look at the type of connection to make sure the horn looks to be correct to the machine. It all looks to be in very nice, restorable condition.
- Cooljjay
- Victor Jr
- Posts: 20
- Joined: Tue Jul 28, 2009 12:09 am
- Contact:
Re: Help with an ID?
Jerry B. wrote:Several of the least expensive Zonophone rear mount machines came with the horn and elbow in a fixed non-swivel position. I suspect the machine in the photo is one with a fixed position horn. I've owned one and it is natural to attempt to move the horn to the left to change the record or needle. It's quite possible that the horn came out of the elbow after such an effort. Jerry BlaisNice machine- I concur with Jerry- late Zonophone... Look carefully at the horn/elbow connection-- In the pic it looks like there is putty or something at that connection-- Look at the type of connection to make sure the horn looks to be correct to the machine. It all looks to be in very nice, restorable condition.
Ah that would explain it! I am sure I could better hide the repair then this but getting that glue separated from the elbow may be a nightmare..
-
- Victor VI
- Posts: 3719
- Joined: Tue Mar 23, 2010 7:00 pm
- Location: Western, WA State
Re: Help with an ID?
The machine is an Oxford sold by Sears. The Oxford was an unmarked late model Zonophone. Since this machine has no Zonophone decal in the front, then it is an Oxford. The elbow and back bracket is correct. It is a pain to change the needle because the elbow is fixed to the bracket, and doesn't swivel. The reproducer is a variation of a Victor Exhibition JR. I'm not sure about the putty for the repair, but I wouldn't let that deter me from purchase. If the machine is under $500.00, I would go after it. These machines are scarce, because they were tossed out when they quit working. Or, they were traded in for a better model. I hope you can get this cheap.
Harvey Kravitz
Harvey Kravitz