I am repairing a VV-405 and only have the motor. The crank the owner sent is a cobble job and I would like to find a proper crank for this gentleman. The problem is, i have no idea how long it should be. Does anyone have this model and could offer some information?
Thanks!
Dave D
How Long Is The Crank For A VV-405?
-
- Victor IV
- Posts: 1228
- Joined: Wed Aug 01, 2012 8:43 pm
- Location: Port Huron, MI
-
- Victor III
- Posts: 816
- Joined: Thu Sep 25, 2014 4:25 pm
- Location: North Central Iowa
Re: How Long Is The Crank For A VV-405?
On my VV-410 it's just short of 5 ¾" to where the crank bends. I'm pretty sure all the cranks are the same on that series of machines. Good luck with it now, Earl.
-
- Victor IV
- Posts: 1228
- Joined: Wed Aug 01, 2012 8:43 pm
- Location: Port Huron, MI
Re: How Long Is The Crank For A VV-405?
Thank you so much!
Dave
Dave
- Skihawx
- Victor III
- Posts: 973
- Joined: Fri Aug 20, 2010 7:48 am
- Location: New Hampshire
Re: How Long Is The Crank For A VV-405?
I am pretty sure one of these is from a VV-405. I know I have other parts from a 405. Both appear to be about the same length. The nicer one is $35 and the rougher one is $25 plus actual shipping.