The Talking Machine Forum — For All Antique Phonographs & Recordings

Do you know of anyone making quality Brunswick Decals?

Gregg Cline makes a good one used on the upright and console machines. If you're working on a Panatrope it might have to be a custom job.

Check here also. Some very unusual decals...

https://www.ebay.com/str/epj24-New-Old- ... 7675.l2563

https://www.ebay.com/sch/m.html?_ssn=ep ... k&_sacat=0

Is this the one? On Ebay for $19.

As suggested above...

Gregg Cline...

Here's his website...

https://www.phonodecal.com/

)

Tony K.

Thanks for the help, I didn't see a Brunswick decal at Greg Klines website , so I purchased one from the ebay link mentioned, Ill let you know what it looks like when I receive . Thanks Again for your responses,

You didn't look hard enough...

The decal is under the "Other Makers" tab...

https://www.phonodecal.com/shop/phonogr ... her+Makers


Also, With all that being said, There are Decals that Gregg has but are not on his website. He just has not updated his pics pages...

An example, is the "4-Minute-2" Decal for the Edison Standard Model "D" machines. He has them, but you won't find it on his webpages... so its always good to e-mail Gregg ahead of time at his e-mail address below to see if he has something that is not listed picturewise on his webpages.

Gregg Cline's e-mail address:

zonophone@woh.rr.com

OR, You can e-mail him through his website as well under the "CONTACT" webpage Tab.

)

Tony K.