Recently came across this on an Ebay auction. I have never seen this type of setup before and was wondering if members would post their opinions as to what machine it may work with. No tonearm length was given in the description just total length.
Blizz
Victor tonearm /back bracket mount
- fmblizz
- Victor IV
- Posts: 1181
- Joined: Tue Jan 12, 2010 4:59 pm
- Location: South Jersey
Victor tonearm /back bracket mount
Last edited by fmblizz on Sat Jan 27, 2024 8:48 am, edited 1 time in total.
- Phono-Phan
- Victor V
- Posts: 2480
- Joined: Fri Apr 06, 2012 9:38 pm
- Location: Plover, WI
Re: Victor tonearm /back bracket mount
The tone arm has been modified to "maybe" fit in the back bracket. The tone arm is from an inside horn machine.
- fmblizz
- Victor IV
- Posts: 1181
- Joined: Tue Jan 12, 2010 4:59 pm
- Location: South Jersey
Re: Victor tonearm /back bracket mount
Exactly my thought. Both connection points on the tonearm seem to be out of the norm from my experience.
blizz
blizz
-
- Victor Monarch Special
- Posts: 8517
- Joined: Tue Feb 10, 2009 11:25 am
- Personal Text: Stop for a visit when in Oregon.
- Location: Albany, Oregon
Re: Victor tonearm /back bracket mount
I agree with the above opinions on the tone arm. It's been modified. I can't tell by the photos but the bracket is either for Victors M, MS, III, or IV or possibly Victors D, V, or VI. The back bracket has a different depth because of the different cabinet dimensions.
Jerry B.
Jerry B.