Page 1 of 1
IT WORKS !!!!!!!!!!!
Posted: Sun Apr 21, 2024 9:11 pm
by xtal_01
My first machine ... got it about a month ago for free ... springs would not wind.
Tore it down .. found the winding pin was sheared.
I cleaned everything and repacked the springs.
Last night I rebuilt the reproducer.
IT WORKS !!!!!!!!
Here it is on my FaceBook page:
https://tinyurl.com/434j3hrk
Re: IT WORKS !!!!!!!!!!!
Posted: Sun Apr 21, 2024 9:14 pm
by kiwiatlarge
There is nothing like playing your first rebuilt motor and reproducer for the first time. Congratulations! A warning though - this hobby is addictive! There is no such thing as only one machine... .
Re: IT WORKS !!!!!!!!!!!
Posted: Sun Apr 21, 2024 9:31 pm
by xtal_01
It is very exciting!
The motor seemed straight forward ... but the reproducer I was worried about!
Still not perfect ... my mica had de-laminiated.
I bought a spare and used it but I can see spots on it where it is coming apart.
But for 115 years old ... it sounds AWESOME!!!!!!!!!!!
..... and yes, I am already thinking about a second machine
Re: IT WORKS !!!!!!!!!!!
Posted: Sun Apr 21, 2024 11:50 pm
by Roaring20s
Good job!
James.
Re: IT WORKS !!!!!!!!!!!
Posted: Mon Apr 22, 2024 6:27 am
by JerryVan
Nice work! You chose 2 of my favorite tunes to play as well,
Re: IT WORKS !!!!!!!!!!!
Posted: Mon Apr 29, 2024 3:21 pm
by Indestructible
Nicely done! Congratulations.
Re: IT WORKS !!!!!!!!!!!
Posted: Mon Apr 29, 2024 4:28 pm
by Inigo
Congrats! I understand and share your excitement! Ah if I could have a machine like that... (I own others, though).
You're an expert, even using bamboo needles... these are my favourites, together with steel soft tone. Those I found give the best results.
Re: IT WORKS !!!!!!!!!!!
Posted: Mon Apr 29, 2024 6:40 pm
by xtal_01
Inigo wrote: ↑Mon Apr 29, 2024 4:28 pm
Congrats! I understand and share your excitement! Ah if I could have a machine like that... (I own others, though).
You're an expert, even using bamboo needles... these are my favourites, together with steel soft tone. Those I found give the best results.
Thanks! I actually just finished it today.
Still need a few little things (two #7 motor board screws, a working lock, leather for the brake) but I put it upstairs in the house and have begun to enjoy it.
I took hours of video and will edit together something in a few weeks (well my wife will edit together something).
Till then, here is a link to a short video I took with my phone today.
https://share.icloud.com/photos/09aU3FU ... hYZtExU_ZA