Hey!
Well I am almost done with my first Victrola.
Just need to replace a few temporary repairs I made to the motor (like replacing the nail I used with the correct pin) and I can put it in the living room.
Question, what is the correct term for the small arm that the reproducer connects to ... just before the large "tone" arm ?
I wanted to put up a post and also ask a few vendors if they have one that is in good shape but didn't know the correct name for it.
Mine had some black material eat into it just after the reproducer. It ate right through the gold finish and even a bit into the copper.
As the unit turned out so well, I figure I would ask around and see if anyone had one that was in good shape (also still looking for the correct motor board screws and maybe a lock since mine will not open or close with the "V" key I have ... or maybe it is the key, something else to look into). I wanted to know the correct name of the part to ask for.
Thanks ... Mike
Correct name for sound / tone arm ?
-
- Victor Jr
- Posts: 39
- Joined: Sat Mar 23, 2024 1:26 am
- Personal Text: I repair toys to tractors
-
- Victor VI
- Posts: 3193
- Joined: Fri Oct 06, 2017 11:39 am
- Personal Text: I've got both kinds of music--classical & rag-time.
- Location: South Carolina
Re: Correct name for sound / tone arm ?
IIRC Victor literature refers to this small part as the gooseneck, and the large part of the tonearm as the taper tube.
Yours is in very nice shape. Great job on the restoration of a good-quality machine.
Yours is in very nice shape. Great job on the restoration of a good-quality machine.
-
Online
- Victor Monarch Special
- Posts: 8525
- Joined: Tue Feb 10, 2009 11:25 am
- Personal Text: Stop for a visit when in Oregon.
- Location: Albany, Oregon
Re: Correct name for sound / tone arm ?
Others might call it a "u-tube."
Jerry B.
Jerry B.
- Inigo
- Victor VI
- Posts: 3822
- Joined: Mon Dec 18, 2017 1:51 am
- Personal Text: Keep'em well oiled
- Location: Madrid, Spain
- Contact:
Re: Correct name for sound / tone arm ?
It looks fantastic... I wouldn't do anything more except play lots of records and enjoy a lot!!!
Inigo
-
- Victor Jr
- Posts: 39
- Joined: Sat Mar 23, 2024 1:26 am
- Personal Text: I repair toys to tractors
Re: Correct name for sound / tone arm ?
I am very happy with the way it worked out.
I didn't want to redo the cabinet but just freshen it up.
A good cleaning wit GoJo (internet tip) ... rinse ... quick once over with Restor-a-finish just to cover up the white wood showing the dents and dings ... two coats of wax.
Could you imagine, if I didn't take it, it may have ended up in the dump!
Best of all to me, it really sounds great! I followed all the videos ... carefully rebuilt the reproducer ... I was amazed!
I didn't want to redo the cabinet but just freshen it up.
A good cleaning wit GoJo (internet tip) ... rinse ... quick once over with Restor-a-finish just to cover up the white wood showing the dents and dings ... two coats of wax.
Could you imagine, if I didn't take it, it may have ended up in the dump!
Best of all to me, it really sounds great! I followed all the videos ... carefully rebuilt the reproducer ... I was amazed!
- Inigo
- Victor VI
- Posts: 3822
- Joined: Mon Dec 18, 2017 1:51 am
- Personal Text: Keep'em well oiled
- Location: Madrid, Spain
- Contact:
Re: Correct name for sound / tone arm ?
It's surprising the well these machines can sing when restored. We're used to see them in films or in flea markets, but the real thing is much more exciting, isn't true?
Inigo
-
- Victor Monarch Special
- Posts: 5395
- Joined: Mon Aug 24, 2009 3:08 pm
- Location: Southeast MI
Re: Correct name for sound / tone arm ?
That slight bit of plating loss on the u-tube is really very minimal. It would be tough finding one much better. Nice work!
-
Online
- Victor II
- Posts: 350
- Joined: Tue Jun 02, 2009 10:19 pm
- Location: Silver Spring, MD
Re: Correct name for sound / tone arm ?
There is ample evidence and we all agree that the Victor called the long part “Taper Tube”
However, I could find no reference to “gooseneck” in the Victor Parts Listing or any of the many Victor Owners booklets that I checked. Van Eps, could you please cite your source? I’d like to add it to my knowledge base.
The Victor parts listing consistently uses S.B. Crook or Sound Box Crook
The owners manuals use the terms Sound Box Tube or Sound Box Crook
Jerry, can you tell us your source also? I suspect U-tube is an unofficial name or one made up by collectors since the tube is in fact U-shaped.
Mark
However, I could find no reference to “gooseneck” in the Victor Parts Listing or any of the many Victor Owners booklets that I checked. Van Eps, could you please cite your source? I’d like to add it to my knowledge base.
The Victor parts listing consistently uses S.B. Crook or Sound Box Crook
The owners manuals use the terms Sound Box Tube or Sound Box Crook
Jerry, can you tell us your source also? I suspect U-tube is an unofficial name or one made up by collectors since the tube is in fact U-shaped.
Mark
VanEpsFan1914 wrote: ↑Sat Apr 27, 2024 8:26 am IIRC Victor literature refers to this small part as the gooseneck, and the large part of the tonearm as the taper tube.
Yours is in very nice shape. Great job on the restoration of a good-quality machine.
-
- Victor Jr
- Posts: 39
- Joined: Sat Mar 23, 2024 1:26 am
- Personal Text: I repair toys to tractors
Re: Correct name for sound / tone arm ?
WOW ... nice job.
Can't argue wit the factory sheets.
Thanks for positing all that info!
Mike
Can't argue wit the factory sheets.
Thanks for positing all that info!
Mike
-
- Victor VI
- Posts: 3193
- Joined: Fri Oct 06, 2017 11:39 am
- Personal Text: I've got both kinds of music--classical & rag-time.
- Location: South Carolina
Re: Correct name for sound / tone arm ?
Hello -
I was basing it off something I saw a very long time ago on one of the old Phonograph Ring webring pages, and thanks for actually finding Victor catalog stuff!m
I was basing it off something I saw a very long time ago on one of the old Phonograph Ring webring pages, and thanks for actually finding Victor catalog stuff!m