Graphite Grease

Share your phonograph repair & restoration techniques here
User avatar
Retrograde
Victor III
Posts: 959
Joined: Sat Sep 04, 2010 1:47 pm

Re: Graphite Grease

Post by Retrograde »

FloridaClay wrote:Looks like Comma CV500G 500g Constant Velocity Lith-Moly Grease is a UK product. Anyone know of a US equivalent?

Clay
Sta-Lube CV Joint Grease You can get this at auto part shops.

FWIW... My experience with white lithium grease is that it separates and dries out in a short time.

User avatar
Chuck
Victor III
Posts: 891
Joined: Fri Mar 25, 2011 11:28 pm
Personal Text: Richards Laboratories http://www.richardslaboratories.com producing high quality cylinder blanks
Contact:

Re: Graphite Grease

Post by Chuck »

Here is a most humble idea:

Take a few tablespoons of Vaseline, put it into
a small jar such as an old mustard or jelly jar.

Add to that about one heaping teaspoon of graphite.

Mix it all up thoroughly, stirring and blending. I use a wooden popsicle stick for this.

That stuff seems to work quite well for me in phonograph springs. After several years when
it starts to dry out a little in there, I just
add a few drops of heavy oil such as 20W50
engine oil.

Then, put a folded paper towel in the bottom
of the motor compartment to soak up the excess
oil as it drools out of there.

Chuck
"Sustained success depends on searching
for, and gaining, fundamental understanding"

-Bell System Credo

need4art
Victor II
Posts: 445
Joined: Thu Jan 15, 2009 6:46 pm
Personal Text: A man is not a man who does not make the world a better place
Location: Arizona

Re: Graphite Grease

Post by need4art »

For the past 6 years I have used Mobil 1 synthetic bearing grease and it has worked very well-with no hardening of any kind at this point. It also does not break down and separate even with the heat in my workshop in an Arizona summer. I have stopped using anything else to repack springs.
Abe

mikejk
Victor II
Posts: 236
Joined: Mon Aug 05, 2013 9:41 pm
Location: Hudson Valley, New York

Re: Graphite Grease

Post by mikejk »

As a newbie, I repacked all my Edison springs in graphite grease thinking I was doing the best and right thing. They all are chugging and thumping and will have to be redone. I will be trying some of the lubricants I have been reading about here. Thanks members.

User avatar
De Soto Frank
Victor V
Posts: 2687
Joined: Wed Dec 01, 2010 1:27 pm
Location: Northeast Pennsylvania

Re: Graphite Grease

Post by De Soto Frank »

Also, try to find something with minimal odor; I made a mistake several years back using Sta-Lube black moly-graph grease in the barrels of my Victrola XI... now when you open the lid, the strong smell of petroleum smacks you in the face... :(

Lubriplate makes a good white lithium grease...
De Soto Frank

User avatar
Henry
Victor V
Posts: 2624
Joined: Thu Jan 08, 2009 11:01 am
Location: Allentown, Pennsylvania

Re: Graphite Grease

Post by Henry »

Ditto on the Lubriplate. This is an old-line brand. Works great on Lionel gears!

To kill the odor, Frank, you could try one of those dangly-thingys they sell in auto stores for stinking (oops, I meant "freshening") up your car. You could get pine, cherry, menthol, strawberry, you name it. :P Better yet, maybe, a little dish of bicarbonate of soda? Or get over to the nearest culm bank and harvest some anthracite fines; carbon is a great odor killer!

User avatar
De Soto Frank
Victor V
Posts: 2687
Joined: Wed Dec 01, 2010 1:27 pm
Location: Northeast Pennsylvania

Re: Graphite Grease

Post by De Soto Frank »

Certainly no shortage of culm up here, Henry ! ;)
De Soto Frank

Post Reply