This item is currently on EBay. I was wondering if this is all that's needed for the 2/4 combination. If so does anyone know how to install it? Thanks.
http://www.ebay.com/itm/EDISON-GEM-PHON ... Sw44BYWW5d
2/4 Gearing For Edison Gem
- Joe Busam
- Victor Jr
- Posts: 45
- Joined: Thu Feb 21, 2013 12:27 pm
- Personal Text: Victor V
- Location: Cincinnati, Ohio USA
- TinfoilPhono
- Victor IV
- Posts: 1926
- Joined: Thu Jan 08, 2009 8:48 pm
- Location: SF Bay Area, Calif.
Re: 2/4 Gearing For Edison Gem
Those gears are from a Gem D, which was made for 2&4 minute. Those wouldn't work to convert earlier Gems. The original combination attachment had a new longer back rod with gearing attached to one end, as well as a gear with a push-pull feature to switch back and forth.
Gem combination attachments are pretty scarce because the early Gems had such weak motors. Getting through a 4 minute cylinder was a challenge for Gem A, B, or C models.
Gem combination attachments are pretty scarce because the early Gems had such weak motors. Getting through a 4 minute cylinder was a challenge for Gem A, B, or C models.
Last edited by TinfoilPhono on Fri Jun 16, 2017 1:04 pm, edited 1 time in total.
- Joe Busam
- Victor Jr
- Posts: 45
- Joined: Thu Feb 21, 2013 12:27 pm
- Personal Text: Victor V
- Location: Cincinnati, Ohio USA
Re: 2/4 Gearing For Edison Gem
Thanks so much for the information. I totally understand the rarity. My Gem is in excellent condition but I know it can only make it through one and a half 2 minute records without winding down. Something I hadn't considered.