The Talking Machine Forum — For All Antique Phonographs & Recordings

It is currently Fri Nov 17, 2017 7:09 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Cleaning the case on an Edison Home
PostPosted: Sun Nov 12, 2017 4:54 pm 
Offline
Victor Monarch
Stop for a visit when in Oregon.
Joined: Tue Feb 10, 2009 12:25 pm
Posts: 4958
Location: Albany, Oregon
One of my project machines is this Edison Home B with repeater. My first impression of the case was that it was dirty and dull. I am a believer in keeping an original finish when possible. I'm not against refinishing but only when necessary. You've probably already heard "it's only original once" a time or two already.

So my first step is to clean the original finish and then make an assessment.

Step 1 - The first thing to do is disassemble the hardware from the cabinet. You are probably cleaning a century worth of dirt, lubricants, and gunk. So it's best to disassemble. Do the best job you are able to do. I clean each part as it is removed from the cabinet. I find that I'm always anxious to see my completed project and know that I'm less likely to do a really good job if I wait to clean parts before they are re-installed.

Step 2 - Use GoJo(without abrasives) or Kotton Klenser, 0000 steel wool, an old tooth brush, and clean rags or paper towels. For years I used Kotton Klenser with excellent results. The last couple of years I've used GoJo with equal results and at a fraction of the cost. Both products are gentle on your hands. I use 0000 steel wood but I don't scrub the finish aggressively. I let the steel wood do the work. I am cautious around decals. I'll use GoJo over the decal and then wipe off almost immediately. Using the base of the cabinet as an example, I'll apply the cleaner with steel wool, one side at a time to another. I wipe the cleaner off the decal and keep going one side at a time. Lastly I use a clean paper towel to remove all the cleaner. If I think a spot needs an additional application, I'll go through the process again. I've read that some collectors keep applying cleaner and paper towels until the towels show only removed cleaner. I am not that aggressive because steel wool is an abrasive. You might use clean rags and cleaner with follow up applications.

Step 3 - After some time, perhaps several hours or overnight, I like to use Howard Feed-N-Wax. I apply the bees wax with a clean rag, let it rest for twenty minutes, and polish with a clean paper towel.

Step 4 - Reassemble your project.

I'm quite pleased with this Home. The wood grain is much more visible since cleaning. Now I need to get the mechanism to Cliff for a spring repair. Sorry, but I've never enjoyed that part of the hobby. It's my one flaw. ;)

An interesting observation of this machine is the fact of 6.5" space to the right of the decal and 5.5" space to the left. From the factory errors are OK and interesting. But if I had done a refinish and installed the decal with an error like that, it would be unacceptable.

Jerry Blais


Attachments:
IMG_1445.JPG
IMG_1445.JPG [ 1.32 MiB | Viewed 183 times ]
IMG_1446.JPG
IMG_1446.JPG [ 1.32 MiB | Viewed 183 times ]
IMG_1450.JPG
IMG_1450.JPG [ 1.4 MiB | Viewed 183 times ]
IMG_1452.JPG
IMG_1452.JPG [ 1.38 MiB | Viewed 183 times ]
IMG_1453.JPG
IMG_1453.JPG [ 2.41 MiB | Viewed 183 times ]
IMG_1454.JPG
IMG_1454.JPG [ 2.14 MiB | Viewed 183 times ]
Top
 Profile  
 
 Post subject: Re: Cleaning the case on an Edison Home
PostPosted: Sun Nov 12, 2017 6:46 pm 
Offline
Victor III
Joined: Wed Feb 11, 2009 2:30 pm
Posts: 764
Looks great, Jerry! Looks like the Edison employee that put on the script transfer didn't stress out about it like we do. ;)

Martin


Top
 Profile  
 
 Post subject: Re: Cleaning the case on an Edison Home
PostPosted: Sun Nov 12, 2017 7:11 pm 
Offline
Victor II
Joined: Mon Jan 02, 2012 10:15 pm
Posts: 385
Location: Vancouver, Canada
Jerry

Great post. We often forget the simple projects can be the most important to restoring a fine machine to earn a coveted spot in someones living room.

Your narrative is also timely as there always seems to be new collectors to our forum and if they see how easy it is to restore phonographs then they likely will stay with us a little longer.

Bruce


Top
 Profile  
 
 Post subject: Re: Cleaning the case on an Edison Home
PostPosted: Thu Nov 16, 2017 12:04 am 
Offline
Victor III
Joined: Sat Oct 24, 2015 10:46 pm
Posts: 627
Location: riverside calif
Great post Jerry. I found out the hard way that I need to clean the teeth in all the gears yo make it run better and quieter, I also use a light Teflon oil on them and the governor Cleaning all that old grease off seems to help sometimes. Tom B


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Americanized by Maël Soucaze.