Question on Triumph Motor

Share your phonograph repair & restoration techniques here
Post Reply
User avatar
rizbone
Victor III
Posts: 544
Joined: Tue May 08, 2012 6:17 pm
Location: Maryland

Question on Triumph Motor

Post by rizbone »

One of the gears on my Triumph has come loose. It looks like it was originally press fit but is no longer tight (see letter A in picture). My question is, can this be soldered, or is that not going to be enough to hold it in place. Also, the end pin on the shaft (letter B) has sheared off. Wondering if anyone has a spare hanging around.
Attachments
trigear.jpg

User avatar
rgordon939
Victor V
Posts: 2563
Joined: Tue Jan 10, 2012 2:41 pm
Location: Linden, NJ 07036
Contact:

Re: Question on Triumph Motor

Post by rgordon939 »

Did you check with Ron Sitko for the gears? His number in NY is ‭(518) 371-8549‬.

Rich Gordon

Post Reply