Question on Triumph Motor
- rizbone
- Victor III
- Posts: 544
- Joined: Tue May 08, 2012 6:17 pm
- Location: Maryland
Question on Triumph Motor
One of the gears on my Triumph has come loose. It looks like it was originally press fit but is no longer tight (see letter A in picture). My question is, can this be soldered, or is that not going to be enough to hold it in place. Also, the end pin on the shaft (letter B) has sheared off. Wondering if anyone has a spare hanging around.
- rgordon939
- Victor V
- Posts: 2571
- Joined: Tue Jan 10, 2012 2:41 pm
- Location: Linden, NJ 07036
- Contact:
Re: Question on Triumph Motor
Did you check with Ron Sitko for the gears? His number in NY is (518) 371-8549.
Rich Gordon
Rich Gordon