Hello! Just thought I'd share my knowledge of these balanced lids. If you have one that is squeaky or too tight, take a size 15 hex key and use a ratchet to adjust the nuts on the spring brackets. Loosen about a quarter turn and try again. Continue until the lid is to your liking. If it's too loose, follow the same procedure but instead tighten it. Hope this helps someone!
Greg
Adjusting Victor Spring Balanced Lids
-
- Victor III
- Posts: 516
- Joined: Sat Oct 14, 2017 5:40 pm
- Personal Text: Greg
- Location: Central Maryland
-
- Victor IV
- Posts: 1065
- Joined: Mon Jun 28, 2010 12:12 pm
- Location: Cranberry Township, PA
Re: Adjusting Victor Spring Balanced Lids
Thanks for sharing this strategy.
Don
Don
-
- Victor III
- Posts: 516
- Joined: Sat Oct 14, 2017 5:40 pm
- Personal Text: Greg
- Location: Central Maryland
Re: Adjusting Victor Spring Balanced Lids
No problem! It seems to be a seldom-discussed aspect of repair, and since mine was so tight I figured it out myself. Thought I'd spare people in the future .
- travisgreyfox
- Victor IV
- Posts: 1157
- Joined: Sat Aug 12, 2017 9:25 pm
Re: Adjusting Victor Spring Balanced Lids
Thanks for the info. I will put that in the proverbial tool box for later usage.
-
- Victor II
- Posts: 327
- Joined: Tue Jun 02, 2009 10:19 pm
- Location: Silver Spring, MD
Re: Adjusting Victor Spring Balanced Lids
The adjustment of the lid support is covered in the 8-35 user’s manual as well as in the service instructions issued to the dealer by Victor. Here are some pages from the 8-35 manual.
-
- Victor II
- Posts: 327
- Joined: Tue Jun 02, 2009 10:19 pm
- Location: Silver Spring, MD
Re: Adjusting Victor Spring Balanced Lids
Here is Victor Service Bulletin No. 12 from September 12, 1929
Victor (Now RCA Victor) provided excellent dealer support..
The information is still useful today!
Victor (Now RCA Victor) provided excellent dealer support..
The information is still useful today!
- Phono-Phan
- Victor V
- Posts: 2479
- Joined: Fri Apr 06, 2012 9:38 pm
- Location: Plover, WI
Re: Adjusting Victor Spring Balanced Lids
Are these Victor Service Bulletins available in reprint? If not, would you consider making reprints?
They look like a great resource.
Ken
They look like a great resource.
Ken
-
- Victor II
- Posts: 327
- Joined: Tue Jun 02, 2009 10:19 pm
- Location: Silver Spring, MD
Re: Adjusting Victor Spring Balanced Lids
Hi Ken,
Some have been reprinted, the directions for adjusting the first style changer appear in the appendix to Bob Baumbach’s Look for the Dog, but most issues of these helpful Service Bulletins have not been reprinted. I suspect the reason is that the reprinting efforts would far exceed what any reasonable collector might pay for the reprints. Everything should be free, right? If you are diligent you will eventually locate these pamphlets on that well know auction site. They were sent to dealers individually ( some had periodic revisions ) and many were bound into a small multi ring “LEFAX” binder. by the dealer. That keyword may yield some results.
You will find some information reprinted in the RCA “Red Books” and the Riders radio servicing manuals.
Feel free to contact me with questions.
Mark
Some have been reprinted, the directions for adjusting the first style changer appear in the appendix to Bob Baumbach’s Look for the Dog, but most issues of these helpful Service Bulletins have not been reprinted. I suspect the reason is that the reprinting efforts would far exceed what any reasonable collector might pay for the reprints. Everything should be free, right? If you are diligent you will eventually locate these pamphlets on that well know auction site. They were sent to dealers individually ( some had periodic revisions ) and many were bound into a small multi ring “LEFAX” binder. by the dealer. That keyword may yield some results.
You will find some information reprinted in the RCA “Red Books” and the Riders radio servicing manuals.
Feel free to contact me with questions.
Mark
Last edited by MarkELynch on Sat Feb 10, 2018 10:44 am, edited 2 times in total.
-
- Victor II
- Posts: 327
- Joined: Tue Jun 02, 2009 10:19 pm
- Location: Silver Spring, MD
Re: Adjusting Victor Spring Balanced Lids
Here is a photo of a LEFAX binder. The Victor service bulletins came pre-punched to fit this pocket sized notebook.
- Attachments
-
- 0CCD41B3-DDE9-4602-9AA5-98E36526E1D7.jpeg (30.76 KiB) Viewed 1968 times