The Talking Machine Forum — For All Antique Phonographs & Recordings

It is currently Sun May 20, 2018 9:40 am

All times are UTC - 5 hours [ DST ]


Forum rules


Please click here to view the forum rules



Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: WANTED: Cylinder reamer and Mandrel W shaft
PostPosted: Fri Apr 13, 2018 4:35 pm 
Offline
Victor II
User avatar
Joined: Sun Mar 19, 2017 7:14 pm
Posts: 322
Location: Long Island NY
I am going to try repairing a bunch of my cylinders. I would like a mandrel and a reamer. The mandrel can be crappy as it will only be used for my experiments.
Thanks!
Kirk
My Kingdom for an Amberola III lower shelf!


Last edited by OldRestorer on Sun Apr 29, 2018 10:12 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Want to buy: Cylinder reamer and Mandrel
PostPosted: Fri Apr 13, 2018 7:24 pm 
Offline
Victor II
www.glassphonohorns.com
Joined: Tue Jan 25, 2011 7:56 pm
Posts: 335
I have an unused old oak reamer that needs sandpaper strips attached and an amberola mandrel I could let you have the pair for 40.00 plus actual shipping if you are interested.


Attachments:
IMG_20180413_191241058.jpg
IMG_20180413_191241058.jpg [ 1.66 MiB | Viewed 398 times ]
Top
 Profile  
 
 Post subject: Re: Want to buy: Cylinder reamer and Mandrel
PostPosted: Sun Apr 15, 2018 6:30 pm 
Offline
Victor II
User avatar
Joined: Sun Mar 19, 2017 7:14 pm
Posts: 322
Location: Long Island NY
I am going to need a shaft on the mandrel. Are there threads in the end that I can use a rod in? I see some online with shafts.
Thanks
Kirk
My Kingdom for an Amberola III lower shelf!


Top
 Profile  
 
 Post subject: Re: Want to buy: Cylinder reamer and Mandrel
PostPosted: Sun Apr 29, 2018 10:11 am 
Offline
Victor V
User avatar
Joined: Tue Dec 14, 2010 1:17 am
Posts: 2746
Location: Where there's "hamburger ALL OVER the highway"...
OldRestorer wrote:
I am going to need a shaft on the mandrel. Are there threads in the end that I can use a rod in? I see some online with shafts.
Thanks
Kirk


If it's from a 30/50/75, at least, it would have been held on the shaft by a collar with a set screw.

Bill


Top
 Profile  
 
 Post subject: Re: Want to buy: Cylinder reamer and Mandrel
PostPosted: Sun Apr 29, 2018 1:50 pm 
Offline
Victor O
Joined: Sun Jul 30, 2017 5:28 pm
Posts: 54
Location: Deltona FL / Brampton ON
OldRestorer wrote:
I am going to need a shaft on the mandrel. Are there threads in the end that I can use a rod in? I see some online with shafts.
Thanks
Kirk

Have you found what you needed? I have a mandrel from a 2min only Home. Perfect for what you want as it has a very beefy shaft. No reamer though.

Herman


Top
 Profile  
 
 Post subject: Re: Want to buy: Cylinder reamer and Mandrel W shaft
PostPosted: Sun Apr 29, 2018 2:51 pm 
Offline
Victor II
User avatar
Joined: Sun Mar 19, 2017 7:14 pm
Posts: 322
Location: Long Island NY
Hello,
I was offered the above but I need a shaft on it.
It should look like this photo below.
I need a good shaft for stability when trying to reform these cylinders. If it even works..

Kirk


Attachments:
Screen Shot 2018-04-29 at 2.47.14 PM.png
Screen Shot 2018-04-29 at 2.47.14 PM.png [ 143.81 KiB | Viewed 224 times ]
My Kingdom for an Amberola III lower shelf!
Top
 Profile  
 
 Post subject: Re: Want to buy: Cylinder reamer and Mandrel W shaft
PostPosted: Sun Apr 29, 2018 4:03 pm 
Offline
Victor O
Joined: Sun Jul 30, 2017 5:28 pm
Posts: 54
Location: Deltona FL / Brampton ON
The most rigid shaft you will find attached to a mandrel is from the 2min Home as I mentioned in my post. Here is a picture sample I borrowed from a previous post from Victroladoctor. Hope he does not mind. The one I have is in my attic and too hot and lazy right now to bring it down to take pictures. The feedscrew threads on my mandrel are no good so no use on a phonograph but will suit your needs.

$25.00 includes shipping if you are interested.


Attachments:
mandrel (1).JPG
mandrel (1).JPG [ 110.66 KiB | Viewed 220 times ]
Top
 Profile  
 
 Post subject: Re: Want to buy: Cylinder reamer and Mandrel W shaft
PostPosted: Mon Apr 30, 2018 6:50 am 
Offline
Victor II
User avatar
Joined: Sun Mar 19, 2017 7:14 pm
Posts: 322
Location: Long Island NY
Looks good!
I will take it and will message you.
Kirk
My Kingdom for an Amberola III lower shelf!


Top
 Profile  
 
 Post subject: Re: Want to buy: Cylinder reamer and Mandrel W shaft
PostPosted: Mon May 14, 2018 9:12 am 
Offline
Victor II
User avatar
Joined: Sun Mar 19, 2017 7:14 pm
Posts: 322
Location: Long Island NY
Mandrel found!

Stephen_Madara,
Can you sell me just the reamer?
Thanks,
Kirk
My Kingdom for an Amberola III lower shelf!
Last bumped by OldRestorer on Mon May 14, 2018 9:12 am.

Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Americanized by Maël Soucaze.