Looking for a tonearm for a VV-VI.
The version without the lid.
Thanks,
Jarret
WANTED: VV-VI Tonearm
-
- Victor VI
- Posts: 3719
- Joined: Tue Mar 23, 2010 7:00 pm
- Location: Western, WA State
Re: WANTED: VV-VI Tonearm
Which VV VI? That machine had a long production life and had many variations. Also, the VV VI never had a lid.
Harvey Kravitz
Harvey Kravitz
- JB Brown
- Victor Jr
- Posts: 24
- Joined: Fri Oct 21, 2011 3:11 pm
Re: WANTED: VV-VI Tonearm
Yes, you are correct.
It the more common model. 10-inch turntable. I can post a pic and serial number tomorrow.
Thanks,
Jarret
It the more common model. 10-inch turntable. I can post a pic and serial number tomorrow.
Thanks,
Jarret
- JB Brown
- Victor Jr
- Posts: 24
- Joined: Fri Oct 21, 2011 3:11 pm
-
- Victor Monarch Special
- Posts: 8515
- Joined: Tue Feb 10, 2009 11:25 am
- Personal Text: Stop for a visit when in Oregon.
- Location: Albany, Oregon
Re: WANTED: VV-VI Tonearm
Actually the Victrola VI with 10" turntable is somewhat unusual in such a frequently seen model. It is worth the effort to complete. I wish someone could provide a photo with measurements for the tone arm. Jerry B.It the more common model. 10-inch turntable.
-
- Victor Jr
- Posts: 10
- Joined: Fri Jun 10, 2016 9:52 am
Re: WANTED: VV-VI Tonearm
I have a VV-VI with a 10" turntable, SN 12772, so a bit earlier than the one posted. Here are some pics of the tonearm with a tape measure. Let me know if you need any additional dimensions.
Mike
Mike
-
- Victor Monarch Special
- Posts: 8515
- Joined: Tue Feb 10, 2009 11:25 am
- Personal Text: Stop for a visit when in Oregon.
- Location: Albany, Oregon
Re: WANTED: VV-VI Tonearm
Thanks for the photos Mike. I'll check my parts bin when I get home in a few days. That type on tone arm slips down over a rod that is fixed to the back bracket. It looks like the rod is missing in Jarret's machine. Jerry Blais
-
- Victor Jr
- Posts: 10
- Joined: Fri Jun 10, 2016 9:52 am
Re: WANTED: VV-VI Tonearm
Jerry, yes, the rod and round piece that fits into the bracket are missing. Here are pictures of those pieces.
Mike
Mike
-
- Victor Monarch Special
- Posts: 8515
- Joined: Tue Feb 10, 2009 11:25 am
- Personal Text: Stop for a visit when in Oregon.
- Location: Albany, Oregon
Re: WANTED: VV-VI Tonearm
Yes, I believe I have part of what you need. I have the tone arm minus the U-tube and I am missing the vertical rod. I'f you'll PM you cell number I will send photos of what I have available. Jerry Blais
-
- Victor Monarch Special
- Posts: 8515
- Joined: Tue Feb 10, 2009 11:25 am
- Personal Text: Stop for a visit when in Oregon.
- Location: Albany, Oregon
Re: WANTED: VV-VI Tonearm
I mailed the tone arm 8/14/18 and the cost was just under $13. Jerry Blais