Wated: Crank for Columbia BKT
-
- Victor Jr
- Posts: 8
- Joined: Sun May 28, 2017 12:53 pm
Wated: Crank for Columbia BKT
I need a crank for my Columbia BKT. Ed
-
- Victor VI
- Posts: 3719
- Joined: Tue Mar 23, 2010 7:00 pm
- Location: Western, WA State
Re: Wated: Crank for Columbia BKT
Where are you located? I might be able to help. There are two types of cranks. If the BKT has the round escutcheon like the Edison machines, it uses a flat bar crank. If the machine has the elliptical escutcheon, then it uses the bent rod type crank. PM me if you wish.
Harvey Kravitz
Harvey Kravitz
-
- Victor Jr
- Posts: 8
- Joined: Sun May 28, 2017 12:53 pm
Re: Wated: Crank for Columbia BKT
I am not familiar with the procedure for posting pm. My estucheon appears to be the elliptical type. The crank needs to screw onto the shaft. All the cranks I have are to large to go in the hole. Thank you for your reply and for any help you can give. I am in Oklahoma. Ed
-
- Victor VI
- Posts: 3719
- Joined: Tue Mar 23, 2010 7:00 pm
- Location: Western, WA State
Re: Wated: Crank for Columbia BKT
Hi Ed, To do a PM(personal email) go down where you see reply and pm. Hit the PM button. If I can figure this out, anyone can. i'm recall slow with computers Anyway, I'll have to go through what I have. I'm almost certain I have what you are looking for.
Harvey Kravitz
Harvey Kravitz
-
- Victor VI
- Posts: 3719
- Joined: Tue Mar 23, 2010 7:00 pm
- Location: Western, WA State
Re: Wated: Crank for Columbia BKT
Ed, I found the crank for your BKT. Send me a PM and we can discuss the details.
Harvey Kravitz
Harvey Kravitz