The Talking Machine Forum — For All Antique Phonographs & Recordings
http://forum.talkingmachine.info/

FOUND: Console Victrola Crank Escutcheon
http://forum.talkingmachine.info/viewtopic.php?f=9&t=31557
Page 1 of 2

Author:  apruizii [ Sat Aug 12, 2017 4:25 pm ]
Post subject:  FOUND: Console Victrola Crank Escutcheon

Doses anyone out there have an extra Victrola crank escutcheon in a parts bin that would fit a VV-210 console type Victrola?

I would appreciate it. Please PM me.

Thanks,

AR

Author:  apruizii [ Tue Aug 15, 2017 10:51 am ]
Post subject:  Re: WANTED: Console Victrola Crank Escutcheon

Somebody out there must have a spare escutcheon for a VV-210. It doesn't have to be in the best shape.

Please let me know.

AR

Author:  JerryVan [ Tue Aug 15, 2017 11:28 am ]
Post subject:  Re: WANTED: Console Victrola Crank Escutcheon

There's a few on eBay right now, although personally, I would balk at the asking price. (But, I'm cheap like that...)

Author:  apruizii [ Tue Aug 15, 2017 11:38 am ]
Post subject:  Re: WANTED: Console Victrola Crank Escutcheon

JerryVan,
Yeah, I've seen some on eBay but was hoping to find one from a forum member at a reasonable price.

AR

Author:  Jerry B. [ Tue Aug 15, 2017 1:10 pm ]
Post subject:  Re: WANTED: Console Victrola Crank Escutcheon

Can you post a photo from another machine with the same escutcheon? I assume you need a nickel one. Jerry Blais

Author:  apruizii [ Tue Aug 15, 2017 2:17 pm ]
Post subject:  Re: WANTED: Console Victrola Crank Escutcheon

Jerry, here's a photo from a similar machine on eBay. The escutcheon looks like it is antique bronze, but nickel would be fine too. I'm just looking for the right estucheon that is presentable to cover the hole and do it's job. Thanks, AR

Attachments:
Screenshot_20170815-140420.png
Screenshot_20170815-140420.png [ 2.13 MiB | Viewed 289 times ]

Author:  Phonofreak [ Tue Aug 15, 2017 9:03 pm ]
Post subject:  Re: WANTED: Console Victrola Crank Escutcheon

This crank escutcheon is very common. I was used from 1917 on. It was used on portables, table tops through the uprights and consoles like yours.
Harvey Kravitz

Author:  apruizii [ Wed Aug 16, 2017 10:26 am ]
Post subject:  Re: WANTED: Console Victrola Crank Escutcheon

Harvey,

Thanks for the information. I was hoping someone on the forum would have one to sell at a reasonable price since they are so common.

AR

Author:  Phonofreak [ Wed Aug 16, 2017 8:37 pm ]
Post subject:  Re: WANTED: Console Victrola Crank Escutcheon

Unfortunately, I don't have one of these. I have seen these on ebay between $10-$15, give or take a little bit.
Harvey Kravitz

Author:  apruizii [ Wed Aug 16, 2017 9:19 pm ]
Post subject:  Re: WANTED: Console Victrola Crank Escutcheon

Harvey

There are some on eBay going for $20+ which is pricy. Hopefully someone on the forum has one for a reasonable price but no luck so far.

AR

Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/