Doses anyone out there have an extra Victrola crank escutcheon in a parts bin that would fit a VV-210 console type Victrola?
I would appreciate it. Please PM me.
Thanks,
AR
FOUND: Console Victrola Crank Escutcheon
-
- Victor II
- Posts: 439
- Joined: Wed Mar 18, 2015 11:54 pm
FOUND: Console Victrola Crank Escutcheon
Last edited by apruizii on Sat Aug 19, 2017 11:15 pm, edited 1 time in total.
-
- Victor II
- Posts: 439
- Joined: Wed Mar 18, 2015 11:54 pm
Re: WANTED: Console Victrola Crank Escutcheon
Somebody out there must have a spare escutcheon for a VV-210. It doesn't have to be in the best shape.
Please let me know.
AR
Please let me know.
AR
-
- Victor Monarch Special
- Posts: 5334
- Joined: Mon Aug 24, 2009 3:08 pm
- Location: Southeast MI
Re: WANTED: Console Victrola Crank Escutcheon
There's a few on eBay right now, although personally, I would balk at the asking price. (But, I'm cheap like that...)
-
- Victor II
- Posts: 439
- Joined: Wed Mar 18, 2015 11:54 pm
Re: WANTED: Console Victrola Crank Escutcheon
JerryVan,
Yeah, I've seen some on eBay but was hoping to find one from a forum member at a reasonable price.
AR
Yeah, I've seen some on eBay but was hoping to find one from a forum member at a reasonable price.
AR
-
- Victor Monarch Special
- Posts: 8515
- Joined: Tue Feb 10, 2009 11:25 am
- Personal Text: Stop for a visit when in Oregon.
- Location: Albany, Oregon
Re: WANTED: Console Victrola Crank Escutcheon
Can you post a photo from another machine with the same escutcheon? I assume you need a nickel one. Jerry Blais
-
- Victor II
- Posts: 439
- Joined: Wed Mar 18, 2015 11:54 pm
Re: WANTED: Console Victrola Crank Escutcheon
Jerry, here's a photo from a similar machine on eBay. The escutcheon looks like it is antique bronze, but nickel would be fine too. I'm just looking for the right estucheon that is presentable to cover the hole and do it's job. Thanks, AR
-
- Victor VI
- Posts: 3719
- Joined: Tue Mar 23, 2010 7:00 pm
- Location: Western, WA State
Re: WANTED: Console Victrola Crank Escutcheon
This crank escutcheon is very common. I was used from 1917 on. It was used on portables, table tops through the uprights and consoles like yours.
Harvey Kravitz
Harvey Kravitz
-
- Victor II
- Posts: 439
- Joined: Wed Mar 18, 2015 11:54 pm
Re: WANTED: Console Victrola Crank Escutcheon
Harvey,
Thanks for the information. I was hoping someone on the forum would have one to sell at a reasonable price since they are so common.
AR
Thanks for the information. I was hoping someone on the forum would have one to sell at a reasonable price since they are so common.
AR
-
- Victor VI
- Posts: 3719
- Joined: Tue Mar 23, 2010 7:00 pm
- Location: Western, WA State
Re: WANTED: Console Victrola Crank Escutcheon
Unfortunately, I don't have one of these. I have seen these on ebay between $10-$15, give or take a little bit.
Harvey Kravitz
Harvey Kravitz
-
- Victor II
- Posts: 439
- Joined: Wed Mar 18, 2015 11:54 pm
Re: WANTED: Console Victrola Crank Escutcheon
Harvey
There are some on eBay going for $20+ which is pricy. Hopefully someone on the forum has one for a reasonable price but no luck so far.
AR
There are some on eBay going for $20+ which is pricy. Hopefully someone on the forum has one for a reasonable price but no luck so far.
AR