I am looking for either a complete HMV 101 motor or the following parts that were mentioned in this thread (minus the motor cover): http://forum.talkingmachine.info/viewto ... 11&t=31930.
So specifically:
-Worm Gear/ Handle Screw
-Matching Circlip
-Non return spring
Also I'm located in the U.S.
-Tom
WANTED: HMV 101 complete motor or parts
- Tpapp54321
- Victor II
- Posts: 284
- Joined: Tue Jun 25, 2013 6:38 pm
- gramophone-georg
- Victor VI
- Posts: 3995
- Joined: Mon Jan 20, 2014 11:55 pm
- Personal Text: Northwest Of Normal
- Location: Eugene/ Springfield Oregon USA
Re: WANTED: HMV 101 complete motor or parts
Tom- That was easy... check your PMs!
"He who dies with the most shellac wins"- some nutty record geek
I got PTSD from Peter F's avatar
I got PTSD from Peter F's avatar
- Tpapp54321
- Victor II
- Posts: 284
- Joined: Tue Jun 25, 2013 6:38 pm
Re: WANTED: HMV 101 complete motor or parts
It turns out that my model of motor is the No. 59, the one that I got from George goes to the motors on the earlier 101's. As such, it's a bit too big. Let me know if you have the parts listed ubove for a HMV model No. 59 motor or a complete motor.
-Tom
-Tom
- Tpapp54321
- Victor II
- Posts: 284
- Joined: Tue Jun 25, 2013 6:38 pm
Re: WANTED: HMV 101 complete motor or parts
I thought that I might try to bring this back up again.
My motor is the ones that’s listed here: http://www.graham-ophones.co.uk/motors- ... 4587112801
Here’s a picture showing sort of what I’m specifically looking for: However, if you have the entire motor I’d also be interested as well
-Tom
My motor is the ones that’s listed here: http://www.graham-ophones.co.uk/motors- ... 4587112801
Here’s a picture showing sort of what I’m specifically looking for: However, if you have the entire motor I’d also be interested as well
-Tom
- mattrx
- Victor IV
- Posts: 1141
- Joined: Wed Oct 12, 2011 9:55 am
- Location: Bartlett, TN
Re: WANTED: HMV 101 complete motor or parts
I have a HMV 101 I am planning to part out-just too far gone. Will parts from this motor help you?
Thanks,
Matt
Edit: Upon close inspection, probably not, but if there are parts you can use, please let me know.
Thanks,
Matt
Edit: Upon close inspection, probably not, but if there are parts you can use, please let me know.
- Tpapp54321
- Victor II
- Posts: 284
- Joined: Tue Jun 25, 2013 6:38 pm
Re: WANTED: HMV 101 complete motor or parts
No, that’s actually exactly what I need! My motor actually has all of the other parts Send me a PM on how much you’d like to get for it.
-Tom Pappas
-Tom Pappas
-
- Victor IV
- Posts: 1065
- Joined: Mon Jun 28, 2010 12:12 pm
- Location: Cranberry Township, PA
Re: WANTED: HMV 101 complete motor or parts
It is good that you are making progress. Keep us informed and post photos when possible.
Don
Don
- mattrx
- Victor IV
- Posts: 1141
- Joined: Wed Oct 12, 2011 9:55 am
- Location: Bartlett, TN