I don't know if these are of interest. Not cracked but they sound crappy.
I figured someone could shave them.
$15.00 plus shipping for all.
Delivery to Wayne, NJ available.
For sale: Poor condition wax cylinders (not cracked) $15.00
- OldRestorer
- Victor III
- Posts: 535
- Joined: Sun Mar 19, 2017 7:14 pm
- Location: Long Island NY
For sale: Poor condition wax cylinders (not cracked) $15.00
It's not what you say... It's what you do...
-
- Victor I
- Posts: 179
- Joined: Thu Feb 05, 2009 9:03 am
- Personal Text: Over Hill And Dale.....and back again.
- Location: Near Ottawa Canada
Re: For sale: Poor condition wax cylinders (not cracked) $15
Have you ever tried recording? VictrolaGuy on youtube has cleaned them down with 3n1 oil and recorded on them. I have never tried it but it looks like it works well. Better than throwing them out.
Kevan
Kevan
- chikukai
- Victor Jr
- Posts: 46
- Joined: Sun Sep 21, 2014 1:13 pm
- Location: New Jersey
Re: For sale: Poor condition wax cylinders (not cracked) $15
I'll take these if I can pick up at Wayne....
- OldRestorer
- Victor III
- Posts: 535
- Joined: Sun Mar 19, 2017 7:14 pm
- Location: Long Island NY
Re: For sale: Poor condition wax cylinders (not cracked) $15
I am not into recording.
Pickup at Wayne is fine but I only go on parking lot day.
Kirk
Pickup at Wayne is fine but I only go on parking lot day.
Kirk
It's not what you say... It's what you do...
- Chuck
- Victor III
- Posts: 891
- Joined: Fri Mar 25, 2011 11:28 pm
- Personal Text: Richards Laboratories http://www.richardslaboratories.com producing high quality cylinder blanks
- Contact:
Re: For sale: Poor condition wax cylinders (not cracked) $15
FYI:Kevan wrote:Have you ever tried recording? VictrolaGuy on youtube has cleaned them down with 3n1 oil and recorded on them. I have never tried it but it looks like it works well. Better than throwing them out.
Kevan
Edison Gold Moulded wax was never intended to be
cut with a recorder cutter. It is quite hard
and will dull up a sharp cutter in roughly two shakes of
a lamb's tail!
"Sustained success depends on searching
for, and gaining, fundamental understanding"
-Bell System Credo
for, and gaining, fundamental understanding"
-Bell System Credo
-
- Victor I
- Posts: 179
- Joined: Thu Feb 05, 2009 9:03 am
- Personal Text: Over Hill And Dale.....and back again.
- Location: Near Ottawa Canada
Re: For sale: Poor condition wax cylinders (not cracked) $15
Thanks for letting me know Chuck I am glad I didn't try it for I only have one cutter. Why do people want or in this case buy moulded and flea bitten records? Maybe I should be asking buyer of these records. Why?
Kevan
Kevan
- Chuck
- Victor III
- Posts: 891
- Joined: Fri Mar 25, 2011 11:28 pm
- Personal Text: Richards Laboratories http://www.richardslaboratories.com producing high quality cylinder blanks
- Contact:
Re: For sale: Poor condition wax cylinders (not cracked) $15
One thing I could imagine that having a stock
of original Gold Moulded wax might be useful for
is if someone ever starts producing metal cylinder molds
for casting new 2-minute Edison Gold Moulded cylinders
again.
Having a good stock of original Gold Moulded Edison
wax will probably help in replicating the formula
for making new Gold Moulded wax.
Or, possibly the old Gold Moulded wax may be able to
be re-cast into new records. Most likely that would
require a little added chemistry to freshen it back up
to decent casting quality, however.
So, there are reasons to save the old Gold Moulded
cylinders and not simply throw them away. We can
learn a lot from analyzing the old material.
Same applies to the 4-minute black wax Amberol cylinders,
although I can't think offhand why anyone would want
to repeat that lesson in how not to make records!
of original Gold Moulded wax might be useful for
is if someone ever starts producing metal cylinder molds
for casting new 2-minute Edison Gold Moulded cylinders
again.
Having a good stock of original Gold Moulded Edison
wax will probably help in replicating the formula
for making new Gold Moulded wax.
Or, possibly the old Gold Moulded wax may be able to
be re-cast into new records. Most likely that would
require a little added chemistry to freshen it back up
to decent casting quality, however.
So, there are reasons to save the old Gold Moulded
cylinders and not simply throw them away. We can
learn a lot from analyzing the old material.
Same applies to the 4-minute black wax Amberol cylinders,
although I can't think offhand why anyone would want
to repeat that lesson in how not to make records!
"Sustained success depends on searching
for, and gaining, fundamental understanding"
-Bell System Credo
for, and gaining, fundamental understanding"
-Bell System Credo
- chikukai
- Victor Jr
- Posts: 46
- Joined: Sun Sep 21, 2014 1:13 pm
- Location: New Jersey
Re: For sale: Poor condition wax cylinders (not cracked) $15
Well, in my case, going by the appearance of most of these, it's a level of crappiness of which I have a good few cylinders and which I can tolerate. I don't mind some surface noise for $1 each!Kevan wrote:Thanks for letting me know Chuck I am glad I didn't try it for I only have one cutter. Why do people want or in this case buy moulded and flea bitten records? Maybe I should be asking buyer of these records. Why?
Kevan
I actually have tried shaving and recording on a black moulded cylinder (once) and though I don't think it harmed my cutter it wasn't a good result at all.
- chikukai
- Victor Jr
- Posts: 46
- Joined: Sun Sep 21, 2014 1:13 pm
- Location: New Jersey
Re: For sale: Poor condition wax cylinders (not cracked) $15
OldRestorer wrote:I am not into recording.
Pickup at Wayne is fine but I only go on parking lot day.
Kirk
ah, have to pass then. I have another event that day.
-
- Victor I
- Posts: 179
- Joined: Thu Feb 05, 2009 9:03 am
- Personal Text: Over Hill And Dale.....and back again.
- Location: Near Ottawa Canada
Re: For sale: Poor condition wax cylinders (not cracked) $15
Thanks for the answer Kirk. I am going to record some day but not there yet.
Kevan
Kevan