Page 1 of 2
WANTED: Front or rear bead molding for Edison W 250
Posted: Wed Apr 18, 2018 10:05 pm
by ehs004
Looking for the rear bead molding or front should work too , the side molding are longer but i could cut it down . Any help please! Would have to be shipped in a tube .
Thanks Eric
Re: WANTED: Front or rear bead molding for Edison W 250
Posted: Thu Apr 19, 2018 1:23 pm
by JerryVan
It's called "pearl & bead" molding. Maybe these folks can help you:
https://www.osbornewood.com/pearl-moulding.aspx
Re: WANTED: Front or rear bead molding for Edison W 250
Posted: Thu Apr 19, 2018 1:37 pm
by ehs004
Thank you Jerry, i will looking into that.
Eric
Re: WANTED: Front or rear bead molding for Edison W 250
Posted: Thu Apr 19, 2018 7:42 pm
by need4art
Eric,
Its not that hard to make a mold of the trim, cast it and then color with oil based paint.
If you want to try this PM me and I will give you details and products. Please include your phone #
Abe
Re: WANTED: Front or rear bead molding for Edison W 250
Posted: Sat Apr 21, 2018 6:40 am
by Dave D
need4art wrote:Eric,
Its not that hard to make a mold of the trim, cast it and then color with oil based paint.
If you want to try this PM me and I will give you details and products. Please include your phone #
Abe
Dear Abe,
I bet a lot of us would enjoy learning from you how to do this. Please consider a public posting.
Dave D
Re: WANTED: Front or rear bead molding for Edison W 250
Posted: Sat Apr 21, 2018 12:45 pm
by ehs004
need4art wrote:Eric,
Its not that hard to make a mold of the trim, cast it and then color with oil based paint.
If you want to try this PM me and I will give you details and products. Please include your phone #
Abe
Thank you Abe ,
A public posting would be a great idea!!
Thank you Eric
Re: WANTED: Front or rear bead molding for Edison W 250
Posted: Sun Apr 22, 2018 6:51 am
by Herman
Dave D wrote:need4art wrote:Eric,
Its not that hard to make a mold of the trim, cast it and then color with oil based paint.
If you want to try this PM me and I will give you details and products. Please include your phone #
Abe
Dear Abe,
I bet a lot of us would enjoy learning from you how to do this. Please consider a public posting.
Dave D
Me too!! I have a Regina music box missing a bit of rope molding.
Re: WANTED: Front or rear bead molding for Edison W 250
Posted: Tue Apr 24, 2018 3:28 pm
by need4art
Lets do this, send me some close up pictures of what you would like to reproduce and the length of it. I am currently in the middle of a job for one of my museums and leave for Mexico to open a micro credit program for Rotary International. I have never done a video before except with my cell phone and I think I will need to get a stand for it. You guys are much more tech. Can I do a decent job with my Samsung 7 phone?
I should also say that I am working on another phonograph restoration project. Working with a 3-D company to see if it is practical for us to have parts made, with matching finishes at a reasonable cost that is eating into my spare time. But if this works we will be able to get really well done parts-and they can do things in wood-like your trim!!!
Abe
Re: WANTED: Front or rear bead molding for Edison W 250
Posted: Sat May 12, 2018 12:37 am
by ehs004
need4art wrote:Lets do this, send me some close up pictures of what you would like to reproduce and the length of it. I am currently in the middle of a job for one of my museums and leave for Mexico to open a micro credit program for Rotary International. I have never done a video before except with my cell phone and I think I will need to get a stand for it. You guys are much more tech. Can I do a decent job with my Samsung 7 phone?
I should also say that I am working on another phonograph restoration project. Working with a 3-D company to see if it is practical for us to have parts made, with matching finishes at a reasonable cost that is eating into my spare time. But if this works we will be able to get really well done parts-and they can do things in wood-like your trim!!!
Abe
Abe,
I can mail you a section when you get caught up no rush , i got the rest of my life!!
Thanks Eric
Re: WANTED: Front or rear bead molding for Edison W 250
Posted: Sat Jun 23, 2018 8:16 pm
by ehs004
I found some remade pearl beading a bit different , looking for a donor machine someone might be parting out!
Thanks Eric