I have recently disassembled my No. 175 motor [from a red Paillard Suitcase] and found the fiber gear on the spindle is pretty chewed up.
I see no way to remove the gear so I'm assuming I need the whole spindle.
Failing that whole No175 motor with a good fiber gear. The spindle is
4 ¼ inches long and the gear is 1 inch in diameter.
WANTED: Spindle for Paillard No. 175 motor
-
- Victor I
- Posts: 140
- Joined: Thu Apr 13, 2017 11:00 am
- Location: Nova Scotia
-
- Victor I
- Posts: 140
- Joined: Thu Apr 13, 2017 11:00 am
- Location: Nova Scotia
Re: WANTED: Spindle for Paillard No. 175 motor
I've tried a few supply houses and there are two still looking, one in the US and the other is a fellow Canadian.
I found this youtube video about a fancier version of mine, but if you go about 12 minutes he discusses the very dilemma I'm having.
https://www.youtube.com/watch?v=gGLfaBy8egk
Would any of you know and/or have contact info for this gentleman?
He might be the guy with 2 or 3 of these gears rattling around in a drawer.
Thanks
Darrell
I found this youtube video about a fancier version of mine, but if you go about 12 minutes he discusses the very dilemma I'm having.
https://www.youtube.com/watch?v=gGLfaBy8egk
Would any of you know and/or have contact info for this gentleman?
He might be the guy with 2 or 3 of these gears rattling around in a drawer.
Thanks
Darrell
-
- Victor I
- Posts: 140
- Joined: Thu Apr 13, 2017 11:00 am
- Location: Nova Scotia
Re: WANTED: Spindle for Paillard No. 175 motor
BTW
Here is image I found online of the motor ... I would be interested in a complete one as well if available or a similar single spring type ... Thorens perhaps?
Here is image I found online of the motor ... I would be interested in a complete one as well if available or a similar single spring type ... Thorens perhaps?