The Talking Machine Forum — For All Antique Phonographs & Recordings
http://forum.talkingmachine.info/

WANTED : Misc motor parts for Edison home
http://forum.talkingmachine.info/viewtopic.php?f=9&t=35976
Page 1 of 1

Author:  ehs004 [ Mon Jun 11, 2018 12:11 pm ]
Post subject:  WANTED : Misc motor parts for Edison home

Hi,
Does anyone have a spare motor , i only need the drive gear that has brass drive gear pressed on to shaft and lower pulley.
Thanks Eric

Attachments:
Lower belt pullley and drive gear (4).jpg
Lower belt pullley and drive gear (4).jpg [ 1.54 MiB | Viewed 421 times ]
Lower belt pullley and drive gear (3).jpg
Lower belt pullley and drive gear (3).jpg [ 2.67 MiB | Viewed 421 times ]
Lower belt pullley and drive gear (2).jpg
Lower belt pullley and drive gear (2).jpg [ 2.95 MiB | Viewed 421 times ]
Lower belt pullley and drive gear (1).jpg
Lower belt pullley and drive gear (1).jpg [ 2.64 MiB | Viewed 421 times ]

Author:  studebakerphonos [ Mon Jun 11, 2018 1:29 pm ]
Post subject:  Re: WANTED : Misc motor parts for Edison home

Could you post a picture?

I get confused with which one is which.....

Author:  outune [ Mon Jun 11, 2018 3:38 pm ]
Post subject:  Re: WANTED : Misc motor parts for Edison home

It sounds like you are needing the small 19-tooth gear-- It is a press-on gear. They frequently crack and spin freely on the shaft-- Ron Sitko makes a replacement 19-tooth gear that is secured by a set-screw. That may be your easiest solution.

Brad Abell

Author:  ehs004 [ Tue Jun 12, 2018 12:28 am ]
Post subject:  Re: WANTED : Misc motor parts for Edison home

Brad ,
Yes!!! ;)

Author:  outune [ Tue Jun 12, 2018 1:50 pm ]
Post subject:  Re: WANTED : Misc motor parts for Edison home

Just call Ron and ask for the 19-tooth Home gear... He'll know exactly what you need.
Brad Abell

Author:  ehs004 [ Wed Jun 13, 2018 11:18 am ]
Post subject:  Re: WANTED : Misc motor parts for Edison home

studebakerphonos wrote:
Could you post a picture?

I get confused with which one is which.....

Pictures posted , can you help?
Thanks Eric

Author:  studebakerphonos [ Wed Jun 13, 2018 2:14 pm ]
Post subject:  Re: WANTED : Misc motor parts for Edison home

Thought I had one, but sorry, I do not.

Ron is the guy, he has the pulley too !

Author:  ehs004 [ Thu Jun 14, 2018 11:49 pm ]
Post subject:  Re: WANTED : Misc motor parts for Edison home

Thanks for the replies , talked to Ron today and my parts are on the way! Hows that for a rhyme?
Thanks Eric :)

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/