Hi, I am looking for 2 x Polyphone horns for my Edison Standard. I would like originals but realise I might have to settle for reproductions. I am located in Australia.
Thanks
WANTED: 2 x Polyphone Horns Edison Standard
- Phono+888
- Victor O
- Posts: 78
- Joined: Sat Oct 05, 2019 8:00 am
- Location: Australia / California / Florida
-
- Victor III
- Posts: 556
- Joined: Wed Jul 06, 2011 10:58 am
- Location: Pensacola, Fl
Re: WANTED: 2 x Polyphone Horns Edison Standard
Are you looking for black funnel horns or brass ones as shown? A standard would have come with the black funnel horns..
Joe
Joe
- MTPhono
- Victor III
- Posts: 629
- Joined: Wed Jan 07, 2009 3:58 pm
- Location: Hayden, ID
Re: WANTED: 2 x Polyphone Horns Edison Standard
I thought that seamless brass horns (with angled reproducer ends) were an option as well as the black funnel horns. Possibly as an upgrade.
- Phono+888
- Victor O
- Posts: 78
- Joined: Sat Oct 05, 2019 8:00 am
- Location: Australia / California / Florida
Re: WANTED: 2 x Polyphone Horns Edison Standard
I am looking for the black funnel horns. The horns I currently have on the standard are reproductions made here in Australia.
-
- Victor III
- Posts: 556
- Joined: Wed Jul 06, 2011 10:58 am
- Location: Pensacola, Fl
Re: WANTED: 2 x Polyphone Horns Edison Standard
I may be wrong as a lot of information about polyphone set ups is not documented. I have understood that the black funnel horns were for the Home and Standard. The Springmotor Polys used the brass horns and the concert Poly uses 24 inch brass horns. I have an original brass horn on my Home Poly that would probably be the correct set up on a springmotor..I don’t know 100% but I imagine that you could get the brass horns seperately for whichever set up you had...