I need that set of three bolts that hold the bedplate/motor mounts in place on an A-250. If any one has them please PM me.
Thanks!
Wanted: Edison A-250 Bedplate Mounting Bolts
- Valecnik
- Victor VI
- Posts: 3829
- Joined: Sat Jan 10, 2009 3:28 pm
- Personal Text: Edison Records - Close your eyes and see if the artist does not actually seem to be before you.
- Location: Česká Republika
- Contact:
- PeterF
- Victor IV
- Posts: 1914
- Joined: Sun Jul 08, 2012 1:06 pm
Re: Wanted: Edison A-250 Bedplate Mounting Bolts
I have a junker A-250 buried in my storage, with a coffee can of loose hardware. Post a photo and I'll try to find 'em.
- Valecnik
- Victor VI
- Posts: 3829
- Joined: Sat Jan 10, 2009 3:28 pm
- Personal Text: Edison Records - Close your eyes and see if the artist does not actually seem to be before you.
- Location: Česká Republika
- Contact:
Re: Wanted: Edison A-250 Bedplate Mounting Bolts
PeterF wrote:I have a junker A-250 buried in my storage, with a coffee can of loose hardware. Post a photo and I'll try to find 'em.
Thanks Peter! Sent you a photo.
- Valecnik
- Victor VI
- Posts: 3829
- Joined: Sat Jan 10, 2009 3:28 pm
- Personal Text: Edison Records - Close your eyes and see if the artist does not actually seem to be before you.
- Location: Česká Republika
- Contact:
Re: Wanted: Edison A-250 Bedplate Mounting Bolts
Bump, Although I've gotten a couple kind offers to search, nothing nothing in hand so far. Maybe the attached picture helps. I need bolts like those shown in the photograph plus any sleeve they screw into, if there is one.
The second photo shows the abomination I'm trying to fix, (screwed in straight through from the outside of the case).
Thanks!
The second photo shows the abomination I'm trying to fix, (screwed in straight through from the outside of the case).
Thanks!