Wanted: Victor III Horn Elbow
-
- Victor I
- Posts: 114
- Joined: Fri Jul 18, 2014 10:48 pm
- Location: Orlando, Florida
Wanted: Victor III Horn Elbow
Looking for a Victor III horn elbow in decent condition for a reasonable price. Will also buy one in any condition if need be. Looking to replace one with a few holes, otherwise in good shape (not sure how to fix holes). Thanks
-
- Victor Monarch Special
- Posts: 8516
- Joined: Tue Feb 10, 2009 11:25 am
- Personal Text: Stop for a visit when in Oregon.
- Location: Albany, Oregon
Re: Wanted: Victor III Horn Elbow
Ron Sitko, currently closed until Jan. ?, sells an authentic replacement. I think the price is around $100 to $125. I would expect a really nice original to be in the neighborhood of $200. I wonder if a Forum member has suggestions for filling the holes in your elbow. Some photos of your elbow may stir up some suggestions. Jerry Blais
-
- Victor I
- Posts: 114
- Joined: Fri Jul 18, 2014 10:48 pm
- Location: Orlando, Florida
Re: Wanted: Victor III Horn Elbow
I made the picture as large as possible. There are actually 2 holes. Thanks
-
- Victor Monarch Special
- Posts: 8516
- Joined: Tue Feb 10, 2009 11:25 am
- Personal Text: Stop for a visit when in Oregon.
- Location: Albany, Oregon
Re: Wanted: Victor III Horn Elbow
I'd suggest checking with a plater. I bet those small holes could be filled and any minor dents removed before nickel plating your elbow. Jerry Blais
-
- Victor II
- Posts: 275
- Joined: Sun May 10, 2015 10:35 pm
- Location: Stratford Ontario
Re: Wanted: Victor III Horn Elbow
I would solder, sand and buff smooth and then have the elbow re-plated with dull nickel.
Blain
Blain
- Indestructible
- Victor I
- Posts: 129
- Joined: Sat Nov 17, 2018 2:42 pm
- Personal Text: Going through life at 160 RPM
- Location: Illinois
Re: Wanted: Victor III Horn Elbow
I would have the holes filled and then re-plated . You will be happy you saved an original part.