SOLD: Pot Metal Replacements Type-1 Changer Sets
Posted: Sun Nov 18, 2018 11:31 pm
Complete set as seen in photos below for $550 if by check and for $568 if paid via PayPay (I’ll refund $18 if funds are received fee free).
Pretested and will work right out of the box to play and change 10” or 12” records in your Victor Victrola model VE 10-50 or Electrola models VE 10-51, VE 10-70, and VE 9-55.
Includes these five cast aluminum parts:
1) Collar Arm with clamping bolt. Inside sanded just right to slide on the tone arm like a glove. Makes for easy, quick, and secure tightening to set needle landing position.
2) Record Pad painted black and includes the original color wool felt already glued on. Early/Mid or Late style available. Late style has a notch in the corner of the pad that will give room for the gold nut/bolt that protrudes from the Record Lifting Ring. The Early/Mid style Ring uses a pin which does not protrude. This Record Pad includes a Full-Dog set screw that is screwed and glued in placed for security. Holes and set screw locations are perfectly located to allow for clean record ejection and record retrieving functions of both 10” and 12” records.
3) Record Size Gear Assembly Base. Will align perfectly with the vertical gear shaft going from the bottom on your Early/Mid or Late style Type-1 changer. This alignment allows for easy, clean, and distinct Record Size Selector changes between its 3 positions.
4) Magazine Stand Base painted black. Early/Mid or Late style Available. Includes the pivot hardware. The Late style uses a shoulder bolt and nut (a black oxide bolt and nut with a brass tube sleeve is provided). While the Early/Mid style uses a brass dowel.
5) Record Size Selector Lever. It’s color matched to the escutcheon plate and includes the set screw.
Also includes Brass Gears, Felt, and the Removal & Installation Instructions:
1) Four quality Boston Gear Company brass gears. Four tapered pins included, as well as a cotter pin that can be used to assist in the alignment of the holes through the gear and shaft before installing the pin.
2) New felt for the Record Shoot Guide. This original color matching wool felt is provided to match that of the Record Pad and to provide the clean look you want from your phonograph. This color matches perfectly with the Record Turntable felt sold by cyber_tigger on eBay.
3) A fairly detailed 12 page Removal & Installation Instruction pamphlet is included with 7 video links to Youtube for extra easy comprehension of the work required to replace your pot metal parts. See download attachment below.
If you are interested in purchasing, please indicate which style of replacement set you would like, Early/Mid or Late style.
To see a detailed description of the 3 styles of the VE 10-50 machine, click the following link:
http://forum.talkingmachine.info/viewto ... ger+styles
PayPal or check accepted. US Priority Mail included free.
Pretested and will work right out of the box to play and change 10” or 12” records in your Victor Victrola model VE 10-50 or Electrola models VE 10-51, VE 10-70, and VE 9-55.
Includes these five cast aluminum parts:
1) Collar Arm with clamping bolt. Inside sanded just right to slide on the tone arm like a glove. Makes for easy, quick, and secure tightening to set needle landing position.
2) Record Pad painted black and includes the original color wool felt already glued on. Early/Mid or Late style available. Late style has a notch in the corner of the pad that will give room for the gold nut/bolt that protrudes from the Record Lifting Ring. The Early/Mid style Ring uses a pin which does not protrude. This Record Pad includes a Full-Dog set screw that is screwed and glued in placed for security. Holes and set screw locations are perfectly located to allow for clean record ejection and record retrieving functions of both 10” and 12” records.
3) Record Size Gear Assembly Base. Will align perfectly with the vertical gear shaft going from the bottom on your Early/Mid or Late style Type-1 changer. This alignment allows for easy, clean, and distinct Record Size Selector changes between its 3 positions.
4) Magazine Stand Base painted black. Early/Mid or Late style Available. Includes the pivot hardware. The Late style uses a shoulder bolt and nut (a black oxide bolt and nut with a brass tube sleeve is provided). While the Early/Mid style uses a brass dowel.
5) Record Size Selector Lever. It’s color matched to the escutcheon plate and includes the set screw.
Also includes Brass Gears, Felt, and the Removal & Installation Instructions:
1) Four quality Boston Gear Company brass gears. Four tapered pins included, as well as a cotter pin that can be used to assist in the alignment of the holes through the gear and shaft before installing the pin.
2) New felt for the Record Shoot Guide. This original color matching wool felt is provided to match that of the Record Pad and to provide the clean look you want from your phonograph. This color matches perfectly with the Record Turntable felt sold by cyber_tigger on eBay.
3) A fairly detailed 12 page Removal & Installation Instruction pamphlet is included with 7 video links to Youtube for extra easy comprehension of the work required to replace your pot metal parts. See download attachment below.
If you are interested in purchasing, please indicate which style of replacement set you would like, Early/Mid or Late style.
To see a detailed description of the 3 styles of the VE 10-50 machine, click the following link:
http://forum.talkingmachine.info/viewto ... ger+styles
PayPal or check accepted. US Priority Mail included free.