Hello Everybody!
I have found today in France, with a lot of chance, a Monarch triple spring motor, with a rigid tone arm. I need to found the horn with the elbow. In original condition. The picture is the illustration of the horn that I need.
Thanks a lot!
WANTED: Victor Horn for Rigid Tone Arm
- kraftwerknation63
- Victor O
- Posts: 50
- Joined: Tue Feb 07, 2017 10:56 am
- Location: Cournon D'Auvergne
WANTED: Victor Horn for Rigid Tone Arm
French 20 years old Phonograph collector!
-
- Victor Monarch Special
- Posts: 8516
- Joined: Tue Feb 10, 2009 11:25 am
- Personal Text: Stop for a visit when in Oregon.
- Location: Albany, Oregon
Re: WANTED: Victor Horn for Rigid Tone Arm
The horn should not be difficult because it's the same as the appropriate size for the front mount version. Finding an original rigid arm elbow will be very difficult and expensive. But a skilled craftsman can take a front mount elbow and change the angle. That's your best practical solution until you find an original.
Jerry Blais
Jerry Blais
- kraftwerknation63
- Victor O
- Posts: 50
- Joined: Tue Feb 07, 2017 10:56 am
- Location: Cournon D'Auvergne
Re: WANTED: Victor Horn for Rigid Tone Arm
Thanks Jerry!
Yes. For me modify the elbow is not a problem. The more important is to found a Horn in original condition. And a elbow to modify.
Thanks
Yes. For me modify the elbow is not a problem. The more important is to found a Horn in original condition. And a elbow to modify.
Thanks
French 20 years old Phonograph collector!