I have a suitcase panatrope phonograph model 106 and I need a crank for it .
The crank is threaded and it goes in about 4 ½ inches from the outside
edge of the cabinet.
The thread size for the crank is 24 threads per inch.
The shaft size is ¼ inch. The threads go up approximately
¾ of an inch on the shaft.
Any help is appreciated
Wanted: Crank for portable
- OldRestorer
- Victor III
- Posts: 535
- Joined: Sun Mar 19, 2017 7:14 pm
- Location: Long Island NY
Wanted: Crank for portable
It's not what you say... It's what you do...
- chrisg
- Victor III
- Posts: 546
- Joined: Sat Oct 05, 2013 10:24 am
- Location: North Carolina
- Contact:
Re: Wanted: Crank for portable
Found this in parts pile. 5/16 (.312) shaft. It has ¼-28 threads. See pics. If you can use it, let me know.
- OldRestorer
- Victor III
- Posts: 535
- Joined: Sun Mar 19, 2017 7:14 pm
- Location: Long Island NY
Re: Wanted: Crank for portable
Checking!
Thank you!
Kirk
Thank you!
Kirk
It's not what you say... It's what you do...
- OldRestorer
- Victor III
- Posts: 535
- Joined: Sun Mar 19, 2017 7:14 pm
- Location: Long Island NY
Re: Wanted: Crank for portable
Sorry it wont work. the threads are not correct.
Thank you so much for trying.
Kirk
Thank you so much for trying.
Kirk
It's not what you say... It's what you do...
- OldRestorer
- Victor III
- Posts: 535
- Joined: Sun Mar 19, 2017 7:14 pm
- Location: Long Island NY