WANTED: Early Victor Electrola pick-up needle thumb screw
Posted: Wed Jun 12, 2019 9:29 pm
WANTED: I am in need of a early type Victor Electrola needle thumb screw like in the photos below. It does need to be the specific needle thumb screw with the double knurled end as pictured as it is a different thread than the later pick-ups.
I would also buy a whole early pickup for parts, so the coil does not necessarily have to be good. This is the pickup with the large bobbin coil that is around 600-900 ohms. If you have the thumb screw and will sell it to me great. If you have the pickup great also. Just email or PM me with what you have, photos and what you ware asking.
Thanks!
Carlton Smith
Indianapolis, IN
electrolman 64
I would also buy a whole early pickup for parts, so the coil does not necessarily have to be good. This is the pickup with the large bobbin coil that is around 600-900 ohms. If you have the thumb screw and will sell it to me great. If you have the pickup great also. Just email or PM me with what you have, photos and what you ware asking.
Thanks!
Carlton Smith
Indianapolis, IN
electrolman 64